The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
! Attention: Please read the operating manual prior to operating the machine for the first time.
Starting your machine
Open the tap.•
Plug in to the socket.•
Open the door of the dishwasher.•
Place the dishes in accordance with the instructions in the •
user manual.
Make sure that the upper and lower impellers rotate freely.•
Put sufficient amount of detergent in the detergent dispenser •
and close its lid.
Make sure that indicators on programme display are •
illuminated by pressing On / Off key.
Check if the Salt and Rinse Aid indicators light and add salt •
and / or rinse aid if needed.
Since different salt brands in the market have different particle
sizes and since the water hardness may vary, dissolution of
the salt in water may take a couple of hours. Therefore, Salt
Indicator remains on for a while after adding salt into the
machine.
You may use Half Load / Tablet Detergent Key and Time •
Delay key features as necessary.
Refer to "Table of Programme Data and Average •
Consumption Values" to select a suitable programme.
Select the desired programme with Programme Selection key.•
Press Start / Pause / Cancel key to start the programme.•
Pay attention not to open the door of the machine when it is
running. If you need to open the door, safety system will stop
your machine. There may be a rush of vapour when you open
the door of your machine; be careful. The programme will
resume running when you close the door.
When the programme you have selected comes to an end, an •
audible warning signal with intervals of 8 seconds will warn
you to turn off your machine. This audible signal will warn you
10 times before it turns off.
Open the door of the dishwasher.•
Press On / Off key to turn off your machine.•
Indicator lights on the programme display will turn off.•
Close the tap.•
Unplug the machine from the socket.•
Leave your dishes in the machine for about 15 minutes after
they are washed in order to have them cooled down. Your
dishes will dry in a shorter time if you leave the door of your
machine ajar during this period. This will increase the drying
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Blomberg GVS 9480 XB20 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Blomberg GVS 9480 XB20 in the language / languages: English as an attachment in your email.
The manual is 0,33 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
