581446

Blomberg GSS 9260 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
QUICK REFERENCE GUIDE EN
Start/cancel button
You use this button to start the selected program; the light on the
button lights up.
Stop the program with the start/cancel button if you would like to
open the door once the dishwasher’s washing program is running.
LED progress indicator lights
The program sequence throughout the
washing process can be monitored from the
progress indicator lights on the control panel.
Warning!
Following the washing stage, in order to drain
and remove water from inside the machine completely, the machine
will pause for approximately 35 minutes. Do not worry this is not a
fault. Then End progress indicator light will come on.
Warning!
Do not switch the machine off before End light comes on.
How to cancel the washing program
Press start/cancel button for 3 seconds. The indicator light will start
flashing. The machine will drain the water inside the machine for
45 seconds. The programme is cancelled when start/stop indicator
light goes off. Then, you can choose and start a new programme.
Important:!
Depending on the stage of the program you have cancelled, there
may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
How to change the washing programme
To change a running programme, press the start/cancel button: The
programme light turns off.
Select a new programme and start it with the start/cancel button:
The respective programme light lights up.
Important:!
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
On/off button
You turn your dishwasher on / off with this button. When turning on,
the indicator light for the last used programme will light up.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection button
Use the programme selection button to select the desired
programme. The corresponding programme light lights up.
Improper Loading Of Dishware
17 7963 01 00_AB
Visual Indicator
Visual Indicator
Wash
Rinse
Dry
End
Combi Tablet Button
Allows to obtain a better drying performance from the multi-purpose
detergents called as all in one detergents such as 2in1, 3in1, 4in1,
5in1 and etc., depending on the hardness level of the tap water. The
programs in which the Combi Tablet function can be enabled are
indicated in the Program Data and Table of Average Consumption
Values. Combi Tablet symbol lights up when you select the Combi
Tablet function.
Rinse aid level indicator light
Salt level indicator light
LED progress indicator lights
Programme indicator lights
1
2
3
4
5
Start/Cancel button
6
Programme selection button
7Combi Tablet button
8
9
10 On/Off button
Time Delay indicator lights
Time Delay button
Time delay
With the delay function of your machine, you may delay the starting
time of the program up to 3-6-9 hours using the Time delay button.
3-6-9 hour lamps will start flashing respectively, each time you
press the delay button. If you press the Start/Cancel button while
the desired delay lamp is flashing, then the delay lamp comes
on constantly and the function is saved to the memory. As of this
moment, the countdown starts. Upon completion of the delay
period, the delay lamp will go off and the selected washing program
will start.
If you press the Delay Button when the 9 hours delay lamp is
flashing, then the delay lamps goes off. If you press the Start/
Cancel button when the Delay Lamps are not lit, then the selected
program will start without any delay.
You may follow the remaining delay period from the delay lamps.
For example: If you select the 9 hours delay option, then the 6
hours lamp will come on when there is 6 hours remaining to the
start of washing program and 3 hours lamp will come on when there
is 3 hours remaining.
Changing the delay period
Press Start/Cancel button. The Delay period lamp will start flashing.
You may choose the new delay time by pressing the delay button
again.
Press Start/Cancel button again to save the setting.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSS 9260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSS 9260 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg GSS 9260

Blomberg GSS 9260 User Manual - English - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info