581443

Blomberg GSN 9122 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
QUICK REFERENCE GUIDE
EN
On/off button
Push in the on/off button and check that the indicator light comes
on.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If the indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser
and refill rinse aid.
Program selection Knob
Use the program selection Knob to choose your washing program.
Half Load (1/2) button
When there are few dishes, you press this button after pressing
the programme selection button. When turning the dishwasher on,
the indicator light on the button lights up. This function helps you to
save water and energy.
Time delay
With the delay function of your machine, you may delay the starting
time of the program up to 3-6-9 hours using the Time delay button.
3-6-9 hour lamps will start flashing respectively, each time you
press the delay button. If you press the Start/Cancel button while
the desired delay lamp is flashing, then the delay lamp comes
on constantly and the function is saved to the memory. As of this
moment, the countdown starts. Upon completion of the delay
period, the delay lamp will go off and the selected washing program
will start.
If you press the Delay Button when the 9 hours delay lamp is
flashing, then the delay lamps goes off. If you press the Start/
Cancel button when the Delay Lamps are not lit, then the selected
program will start without any delay.
You may follow the remaining delay period from the delay lamps.
For example: If you select the 9 hours delay option, then the 6
hours lamp will come on when there is 6 hours remaining to the
start of washing program and 3 hours lamp will come on when there
is 3 hours remaining.
Changing the delay period
Press Start/Cancel button. The Delay period lamp will start flashing.
You may choose the new delay time by pressing the delay button
again.
Press Start/Cancel button again to save the setting.
Visual Indicator
Start/Cancel button
You use the button to start the selected program; the light on the
button lights up.
Stop the program with the Start / Cancel button if you would like to
open the door once the dishwasher’s washing program is running.
LED progress indicator lights
The program sequence throughout the
washing process can be monitored from the
progress indicator lights on the control panel.
! Warning
Following the washing stage, in order to drain
and remove water from inside the machine completely, the machine
will cancel for approximately 35 minutes. Do not worry this is not a
fault. The End progress indicator light will come on when finished.
! Warning
Do not switch the machine off before End light comes on.
How to cancel the washing program
To cancel a program while the machine is operating:
Press start/stop button for 3 seconds. The machine will drain the
water inside the machine for 45 seconds. The program is cancelled
when washing light goes off. Then, you can choose and start a new
program.
! Important:Depending on the stage of the program you have
cancelled, there may be detergent residue or rinse aid inside the
machine and on the load. Make sure the items in the dishwasher
are not used before washing properly.
How to change the washing program
To change the program selection while the machine is operating:
Press Start/Cancel button. The washing light will go off.
Select the new program. Press Start/Cancel button. The washing
light will be on and new program will start.
! Important:The new program will NOT start from the beginning.
It will start from the stage last carried out by the previous program
selection.
Improper Loading Of Dishware
Cancelling the delay function
Keep the Start/Cancel button pressed for 3 seconds. The selected
delay period will be cancelled.
As soon as the cancelling starts, the water that may be remained in
your machine will be drained for 30 seconds due to safety reasons.
17 7932 01 00_AG
On/Off indicator light
Programme selection Knob
Start/Cancel button
LED progress indicator lights
On/Off button
1
2
3
4
5
Rinse aid level indicator light
Salt level indicator light
Time Delay indicator lights
Time Delay button
6
7
8
9
Half Load (1/2)
10
On/Off
Wash
Dry
End
Visual Indicator
(If applicable)
2


Need help? Post your question in this forum.

Forumrules
1

Forum

blomberg-gsn-9122

Reset search

  • Hi
    My blomberg 9122 salt level indicator lights all the time after salt added Submitted on 3-12-2021 at 10:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blomberg GSN 9122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blomberg GSN 9122 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blomberg GSN 9122

Blomberg GSN 9122 User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info