The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
! Attention:Please read the operating manual prior to operating the machine for the first time.
How to use your dishwasher:
Open the water tap.•
Plug to the mains.•
Open the door and load the dishwasher. Check if both upper •
and lower spray arms move freely.
Pour (Put in) the detergent.•
Push in the on/off button and check that the display lights •
comes on. Check the salt and rinse aid level indicators
before you start the machine. If necessary add salt and rinse
aid.
Use the programme selection button to choose your washing •
programme.
You may use Half Load/Combi Tablet button - Delayed Start •
Button features as necessary.
Start the programme with the Start / Cancel button:•
Close the door then programme starts.•
Attention
Avoid opening the door during the washing process. This
interrupts the washing process, and hot steam will escape. When
the door is closed, the programme will continue.
When the program you have selected comes to an end, an •
audible warning signal with intervals of 8 seconds will warn you
to turn off your machine. This audible signal will warn you 10
times before it turns off. Open the door Press the on/off button
after the programme is completed. The indicator lights will go
off.
Close the water tap. Pull out the plug.•
Leave your dishes in the machine for about 15 minutes after •
they are washed in order to have them cooled down. Your
dishes will dry in a shorter time if you leave the door of your
machine ajar during this period. This will increase the drying
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Blomberg GLN 9460 XB at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Blomberg GLN 9460 XB in the language / languages: English as an attachment in your email.
The manual is 0,45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
