626842

Blendtec EZ 600 Manual

3
Zoom out
Zoom in
Previous page
1/19
Next page
32
1.7 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT
SOLD BY BLENDTEC
The use of any unauthorized attachments may cause fire, electric shock, and/or
injury and will void the warranty�
1.8 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE
APPLIANCE IS OPERATING
1.9 USE CAUTION WHEN BLENDING HOT LIQUIDS
Your Commercial series blender may have a vented lid that acts as a pressure
relief to allow steam to escape� Be careful not to come in contact with any steam�
1.10 POWER CORD PRECAUTIONS
• NEVER operate with a damaged cord or plug� If the supply cord is damaged it
must be replaced by the manufacturer or authorized service agent to avoid
a hazard�
• DO NOT permit the cord to hang over the edge of the work surface�
• NEVER use an extension cord with the unit�
• Unplug the blender motor when not in use, before changing blender locations,
or when cleaning�
EACH POWER UNIT MUST BE PROTECTED BY A SEPARATE CIRCUIT BREAKER
OR FUSE, SEE MODEL FOR SPECIFICATIONS
1.11 NEVER ATTEMPT TO REPAIR THE POWER UNIT
Never remove the blender motor cover� The blender motor does not contain user-
adjustable or serviceable parts� A qualified service agent must make all service
adjustments� Removing the cover or attempting to service the blender will void
the warranty�
1.12 TURN THE BLENDER OFF WHEN NOT IN USE
1.13 AVOID TOUCHING THE BLENDER DRIVE SOCKET OR JAR
SHAFT AFTER USE!
The blender drive socket and jar shaft may become very hot after blend cycles�
1.14 SAFETY
This appliance is not intended for use by persons (including children) with lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety� Children
should be supervised to ensure that they do not play with the appliance�
1.15 NEVER OPERATE THE BLENDER WITH MORE THAN THE
MARKED CAPACITY OF THE JAR
SECTION 2: UNPACKING
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE
2.1 UNPACKING YOUR BLENDER
You should have received the following items:
• Commercial series blender motor base
• One or more blender jars with lid and sound enclosure*
• Additional literature may be included depending on package configuration�
*Sound enclosure is available only on the Stealth 875™, Stealth 885™ and
Connoisseur 825™ models�
1� Remove blender motor base, blender jar, lids and sound enclosure (if included
with model) from packaging�
2� Unwind the power cord�
3� Check for any packing material that may have blocked ventilation holes on the
underside of the blender motor base�
4� Inspect all items to ensure no damage occurred during shipment�
5� If any damage has occurred, contact your Blendtec service agent immediately�
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Record your blender motor serial number and date of purchase in the space
below� You will need these when contacting Blendtec for service or questions�
Motor Serial # (Found on bottom of motor base):_______________________
Date of Purchase: ____________________________________________
Purchased From: _____________________________________________
2.3 REGISTERING YOUR BLENDER
Register online at www�blendtec�com/registration
SECTION 3: GETTING TO KNOW YOUR BLENDER
3.1 BLENDER MOTOR BASE
• Smart Touch Interface: Varying models consist of preprogrammed cycles,
incremental speed cycles, timed cycles, a Stop button and a Pulse button�
• Hardened Metal Drive Socket: This is where the jar couples with the motor to turn
the blade assembly; made of hardened metal�
• Information Center: This displays the number of times a blend cycle button has
been pressed� It also indicates overload or over-temperature conditions�
• Power Unit: This unit is located within the blender motor base and contains the
computerized electronics that run the blender�
• Motor Base Cover: Houses the power unit in a durable, plastic material�
• Power Cord: The power cord is located at the back of the motor base cover�
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blendtec EZ 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec EZ 600 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blendtec EZ 600

Blendtec EZ 600 User Manual - English, French, Spanish - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info