Manual Blendtec CLASSIC 570 (page 3 of 40) (English, German, French, Spanish)

626832

Zoom out

Zoom in

1/40

ENGLISH

4 5

Never attempt to repair the blender base.

Never remove the blender motor cover. The blender motor does

not contain self-adjustable or serviceable parts. A qualied service

agent must make all service adjustments. Removing the cover or

attempting to service the blender will void the warranty.

Power off machine when not in use.

The power switch on all Classic blenders and the Pro750 is located on

the back of the blender motor cover. The o button for all Designer

Series and Professional 800 blenders is found in the top right corner

of the touchpad.

Avoid touching the blender drive socket or jar shaft

after use!

The blender drive socket and jar shaft may become very hot after

blend cycles.

Special safety instructions regarding the

Blendtec Go accessory.

• NEVER operate the Blendtec GO accessory unless the cup

is securely attached to the micronizer.

• NEVER use soup cycle or operate the blender for more than

60 seconds with the GO accessory attached.

Safety

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

Above Counter Installation

• Select a location that is near an electrical outlet. Also consider

proximity to ingredients, as well as available counter space.

• Place the blender on the counter in a spot where the air intake

vents on the sides and exhaust on the back of the blender are

unobstructed.

• Ensure there is enough room above and around the unit to allow

for unhampered movement of the sound enclosure, if applicable.

• Plug the unit into an outlet with appropriate electrical protection.

• For Pro 750 In-Counter installation instructions, please see

online user manual: https://www.blendtec.com/support/guides

This blender is intended for home use only! Any use

of this blender for commercial purposes voids all

warranties.

Never operate the blender with more than the marked

capacity of the jar.

Save these instructions for future reference. For more information, please visit www.blendtec.com.

Read all instructions carefully before using the Blendtec® blender.

Following these instructions will help prevent injuries and damage

to the machine which will ensure that you have the best possible

experience with the blender.

Avoid contact with moving parts.

• ALWAYS keep ngers, hands, hair and clothing away from

all moving parts.

• ALWAYS keep all utensils away from the drive socket and blender

jar blade during operation as utensils may damage the blade or

the blender jar.

• NEVER put hands into the blender jar or add substances by hand

when the blender jar is on the motor base.

• NEVER touch the blade with your ngers whether it is on or

o the motor base.

• NEVER place jar into drive socket if blender motor is operating.

• DO NOT rock or remove the blender jar during operation.

These precautions will help prevent personal injury

and/or damage to the blender.

Never operate the blender if it appears damaged.

If the blender malfunctions, call an authorized Blendtec service

agent immediately. If it is dropped or damaged in any way, return

the blender to a Blendtec service agent immediately for examination,

repair, electrical or mechanical adjustment, or possible replacement.

Never operate blender in liquid.

To protect against the risk of electrical shock, do not put the motor

base in water or other liquid. Do not use the blender outdoors where

it may get wet. This will void the warranty.

Never put non-food items into jar.

Utensils, rocks, glass and other non-food items are dangerous if

placed in the jar. Damage caused by such foreign objects will void the

warranty. Keep hands and utensils out of the jar while blending to

reduce the risk of severe injury to persons or damage to the blender.

Utensils may only be used when the blender is not running.

Never operate the blender without the lid in place.

This product should NOT be used for more than 5

continuous minutes.

Never operate the blender using attachments not

sold by Blendtec.

Use of any unauthorized attachments may cause re, electric shock,

and/or injury and will void the warranty.

Blender jar must be properly in place while appliance

is operating.

Warning, do not blend hot liquids or other hot

ingredients.

Starting blend cycles with boiling or very hot liquids may result

in burns or cause the lid to blow o.

Use caution when blending on the hot/soup cycle.

When blending on the Hot Soup cycle, friction of the blade will heat

the contents. The vented lid will allow pressure relief. Be careful not

to come in contact with any steam coming from the clear center lid.

Power cord precautions

• NEVER operate with a damaged cord or plug. If the supply

cord is damaged it must be replaced by the manufacturer

or authorized service agent to avoid a hazard.

• DO NOT permit the cord to hang over the edge of the work

surface.

• NEVER use an extension cord with the unit.

• Unplug the blender motor when not in use, before changing

blender locations, or cleaning.

IMPORTANT SAFEGUARDS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blendtec CLASSIC 570 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blendtec CLASSIC 570

Blendtec CLASSIC 570 User Manual - English - 18 pages

Blendtec CLASSIC 570 User Manual - French - 11 pages

Blendtec CLASSIC 570 User Manual - Spanish - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blendtec CLASSIC 570 Manual

Product: