43758
12
Zoom out
Zoom in
Previous page
1/14
Next page
24
The RDS system (Radio Data System)
Most FM radio stations broadcast an inaudi-
ble RDS data telegram alongside their pro-
grammes.
RDS offers you benefits such as the indicati-
on of the programme station name or auto-
matic switching to an alternative frequency
offering better reception of the same RDS
programme.
Due to these benefits we recommend you to
take advantage of this service and to switch
on RDS.
Switching RDS on/off
To switch the RDS function on or off,
press the RDS button.
To tune in and store stations on the U or T
memory bank proceed as described above.
If you have selected an FM RDS station
which can be decoded by the set, the station
name will appear on the display panel.
Should the transmitted RDS signal be too
weak, the display shows “
*
Uand the corre-
sponding frequency. If the reception conditi-
ons do not improve within approximately
30 seconds, the system will automatically
start searching for an alternative frequency.
During this period the display shows
“SEARCH”.
The search process will be aborted as soon
as the system has found a better frequency of
the same RDS station.
If there is no such stronger frequency availa-
ble, the unit will return to the original station.
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. If you are listening to one
programme and move to an area where
another linked regional programme beco-
mes stronger, the unit will switch to that
programme. If you wish to continue listening
to the first programme, switch on the regional
function:
•Press the RDS button for approximately
2 seconds.
“REG ON” or “REG OFF” appears in
the display.
If the display shows “REG OFF”, press
the RDS button again for 2 seconds.
To deactivate the regional function,
•hold down the RDS button until “REG
OFF” appears in the display.
The RDS-EON function
Enhanced Other Networks
(available in some countries)
There are also FM stations which do not
actually transmit traffic programmes them-
selves, but by using RDS-EON they offer the
possibility to receive the traffic messages
broadcast by another traffic programme sta-
tion in the same radio network.
To activate the RDS-EON function,
•press buttons RDS and TI.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic programme station for the duration of
the message and return to the original pro-
gramme afterwards. The name of the trans-
mitting station will appear in the display.
IVECO, gb 15.10.2001, 9:13 Uhr24
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt TRC 2446 RDS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt TRC 2446 RDS in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt TRC 2446 RDS

Blaupunkt TRC 2446 RDS User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info