Manual Blaupunkt THb 200A (page 23 of 24) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish)

61689

Zoom out

Zoom in

1/24

THb 200A

Connection (see p. 2 /Fig. 2)

Connection 6 is connected to the positive pole of the

battery and connection 7 to negative vehicle ground.

The control of the THb 200A should ideally be a two-

channel control, either via the preampliﬁ er outputs or the

loudspeaker outputs of the car sound system. A control

solely via the right or left channel is also possible since the

low-frequency portion of the music is generally identical

on both channels.

The preampliﬁ er outputs are connected to the cinch (RCA)

sockets of the woofer box via a shielded sound cable.

To connect the device, we explicitly recommend the use of

the original Blaupunkt RCA cable 7 607 885 093 (1.3 m) or

7 607 886 093 (5 m).

With control via the loudspeaker outputs, the input con-

nections of pos. 9/: are fed to the closest loudspeaker

cables (front or rear) on the left and right. They are sepa-

rated and connected to the input connections. The polarity

of the + or - connections must be observed. Bridge output

stages (BTL) can also be connected directly without an

additional adapter.

TIM function:

For car sound systems with activated TIM function, the

THb 200 A must be controlled via the loudspeaker out-

puts of the car sound system and not via the RCA inputs

(see page 2 / Fig. 2 of the car sound system operating

instructions).

1 Input sensitivity

2 Phase position

3 Upper cut-off frequency

4 Connector cable

5 Preampliﬁ er inputs

6 + Battery

7 - Ground

Left loudspeaker input

9 Right loudspeaker input

: 10 A fuse

; Status display (PRT/PWR)

Settings

The following control setting is recommended as basic

setting before putting the device into operation: Sensitivity

(gain) pos. 1 to minimum, phase pos. 2 to 0°, ﬁ lter (cross-

over) pos. 3 to approx. 80 Hz. Switch on the device and

select a musical piece with distinctive bass playback.

Increase the volume of your stereo system to the desired

volume level. Now slowly increase the gain control 1

until you can hear a clear ampliﬁ cation of the bass level.

Next, use the crossover control 3 to select a ﬁ lter setting

that provides a well-contoured bass. You may have to

alternately optimise the gain control setting 1 and the

ﬁ lter setting 3.

A droning bass with excessive volume requires a ﬁ lter

setting with a low frequency.

Technische Daten, Speciﬁ cations, Caractéristiques techniques, Dati tecnici,

Technische gegevens, Tekniska data, Datos técnicos, Dados técnicos, Tekniske data,

Dane techniczne, Technické údaje, Technické údaje, Τεχνικά χαρακτηριστικά, Teknik

veriler, Tekniset tiedot, Технические характеристики, Speciﬁ cations

Max Power 140 W

RMS Power 70 W (DIN 45324 @14,4 V)

I max/min 10 A / <3 mA

Phase 0° / 180°

Frequency response 30-120 Hz

Low pass ﬁ lter 40-120 Hz

Gain 0.1V-8 V

Cone size 200 mm / 8"

Cone material Aluminium Compound

High Level Input

Size (WxHxD) mm 340 x 225 x 71 (13.4" x 8.9" x 2.8")

Weight 4.3 kg

1_THB_200A_B_12_06.indd 231_THB_200A_B_12_06.indd 23 04.12.2006 11:21:09 Uhr04.12.2006 11:21:09 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt THb 200A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt THb 200A Manual

Product: