613051
31
Zoom out
Zoom in
Previous page
1/33
Next page
28
PIR is slow to respond:
-- This is normal. PIR has sophisticated false arm filter setting to prevent accidental trigger. It
is also less sensitive when walking directly toward it:
PIR give false alarm:
-- Make sure pets have no access to protected area.
-- Make sure the PIR is not pointed at source of heat or moving objects
Door Contact
Door Contact LED flashes when activated:
-- Door Contact is on low battery or tamper switch triggered.
Door Contact does not respond to door/window opening
-- Batteries exhausted, please change battery.
-- The magnet is too far away from the Door Contact, please check the gap between the
magnet and the Door Contact. Reduce the gap and test the Door Contact again.
Remote Controller
Remote Controller LED glows dimly when any key is pressed
-- Remote Controller on low battery.
Factory Reset
The Factory Reset function will delete all learned in devices and returns all system setting to
default value. After the setting you will need to setup the system again from the beginning via First
Time Setup.
1. Power down Control Panel by disconnecting AC Power and switching off battery switch.
2. Apply AC Power while holding down the
key.
3. Release the
key when you hear a beep, the screen will display Enter Code.
4. Enter the following keys sequence:

, OK
5. Press the key
6. Reset is complete and all programmed parameters are reset to factory default setting. All
devices are removed and must be learnt in again.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt SA 2700 Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt SA 2700 Kit in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt SA 2700 Kit

Blaupunkt SA 2700 Kit User Manual - German - 60 pages

Blaupunkt SA 2700 Kit User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info