614228
1
Zoom out
Zoom in
Previous page
1/2
Next page
PSS-S1
ENGLISH
Power Switch
Power Switch PSS-S1 is only
compatible with SA-series alarm
systems
Getting Started
1. Plug the Power Switch into the
power outlet. The LED will flash
twice. (Figure 1)
2. Press and hold the Learn/Switch
button (Figure 2) for about 10
seconds and release the button
when LED begin to flash. The
Power Switch is now under learning
mode.
3. Please refer to the Power Switch
learning function in your Control
Panel manual to send a signal to
Power Switch.
If you do not want to learn in the
Power Switch yet, press the
Learn/Switch button once to exit
learn mode, the LED will stop
flashing.
4. When the Power Switch receives
signal from Control Panel, the LED
will flashes twice to confirm, then
turn off. Learning is now complete.
Operation
Plug the home appliance you
want to control into the Power
Switch. The appliance must be
turned ON. (Figure 3)
The Power Switch can be
remotely controlled using
Blaupunkt’s Connect2Home
smartphone application. Please
refer to your Control Panel
manual for detail.
You can toggle on/off the Power
Switch manually by pressing the
Learn/Switch button.
LED Indicator
ON: Power Switch is turned ON.
OFF: Power Switch is turned OFF
Maximum Load
110V: 1760W 16A
230V: 3680W 16A
Specification
Environmental Condition:
-10°C to 40°C, relative humidity 85%
non-condensing.
Radio:
433 MHz
ESPAÑOL
Interruptor de alimentación
Éste dispositivo PSS-S1 es
compatible solo con sistemas
de alarma de la serie SA.
Pasos iniciales
1. Enchufar el dispositivo en la toma
de corriente. El LED parpadeará
dos veces.(Figura 1)
2. Mantener oprimido el botón de
prueba (Figure 2) durante 10
segundos y liberarlo cuando el LED
empiece a parpadear. Ahora el
interruptor de alimentación está en
modo aprendizaje.
3. Favor consultar el manual del panel
de control, la función del
aprendizaje del PSS para enviar
una señal al interruptor de
alimentación.
Si no desea realizar el aprendizaje
aún, oprimir el botón de prueba una
vez para salir del modo de
aprendizaje. El LED parará de
parpadear.
4. Cuando el interruptor de
alimentación recibe señal del panel
de control, el LED parpadeará 2
veces para confirmar; y luego se
apagará. El aprendizaje ahora se
ha completado.
Operación
Conectar el electrodoméstico que
quiere controlar dentro del
interruptor de alimentación. El
electrodoméstico se deberá
encender. (Figura 3)
El interruptor de alimentación
puede ser controlado
remotamente usando el App de
Blaupunkt “Connect2Home” a
través de su smartphone. Favor
consultar el manual del aplicativo
para obtener más detalles.
Se puede activar/desactivar el
interruptor de alimentación
manualmente presionando el
botón de prueba.
Indicador LED
ON: El interruptor de alimentación está
encendido.
OFF: El interruptor de alimentación
está apagado
Carga Máxima
110V: 1760W 16A
230V: 3680W 16A
Especificaciones
Condiciones ambientales:
-10°C hasta 40°C, humedad relativa del
85% sin condensación.
Frecuencia:
433 MHz
Figure 1 / Figura 1
Figure 2 / Figura 2
Figure 3 / Figura 3
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt PSS-S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt PSS-S1 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt PSS-S1

Blaupunkt PSS-S1 User Manual - English, Dutch - 1 pages

Blaupunkt PSS-S1 User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info