394432
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
ODsb 8000A
GB
Introduction
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Please read these operating instruc-
tions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the hotline telephone numbers
printed at the back of this booklet.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
Germany
Safety instructions
When carrying out installation work
and making connections please ob-
serve the following safety instruc-
tions:
- Disconnect the negative terminal of
the battery! When doing so, please
observe the vehicle manufacturers
safety instructions.
- Make sure you do not damage ve-
hicle components when drilling any
holes.
- The cross sections of the positive
and negative cables must not be
less than 2.5 mm
2
.
- Incorrect installation may cause in-
terference with electronic vehicle
systems or your car radio.
Instructions for installation and
connection
The final stage must be installed pro-
fessionally for reasons of safety. The
mounting surface must be suitable for
the screws provided, and must provide
firm support (see page 19, Fig. 1).
Fit a fuse in the amplifier power line no
more than 30 cm from the vehicle bat-
tery, in order to protect the battery in the
event of a short-circuit between it and
the power amplifier. The amplifier’s own
fuse protects the amplifier itself, but not
the car battery.
Connection (see page 20, Fig. 2)
Connect red wire 6 with positive bat-
tery, the wire 7 with negative vehicle
ground and the control wire 8 with the
control output (e.g. for electronic aerial
or amplifier) of the car stereo equipment.
The ODsb 8000A has two drive options,
either via the preamplifier output termi-
nals or the loudspeaker output terminals
of the car stereo equipment. Preampli-
fier output terminals are connected to
cinch (RCA) jacks of the Woofer Box
via a shielded audio line. When using
the loudpeaker output terminals as drive
option, run the input leads 9 and :
ODsb_8000A.pmd 24.06.2005, 12:56 Uhr4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt odsb 8000 a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt odsb 8000 a in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info