614605
12
Zoom out
Zoom in
Previous page
1/15
Next page
25
München CD 43
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Press the CLR button > for appro-
ximately 14 secs. until “CLR.3” is
shown in the display.
The TPM memory for all disks is clea-
red.
Clearing the TPM memory with DSC
The DSC function of this set allows you to
completely clear the memory of one or se-
veral CDs.
With the update function you can confirm the
TPM programming for all CDs which shall be
kept in the TPM memory.
To clear the TPM memory for certain disks
simply do not confirm the corresponding
TPM programming. Proceed as follows:
Press DSC 7.
Press
/ F until “UP-D” (update)
appears in the display.
After a short period of time the display
shows “LOAD”.
Now insert the CD the TPM memory of
which shall be maintained. The display
shows “READ”. The disk will be
ejected automatically.
Insert the next CD.
Go through this procedure again for all disks
for which you wish to maintain the TPM
programming.
Finally press the TPM button < longer
than 2 seconds.
Press button 7 to switch the DSC
mode off.
All disks which have been inserted remain in
the TPM memory. All others are cleared.
The SCAN function 2
This function allows you to sample all CD
tracks one after another for about 10 secs.
each.
To activate SCAN
press knob 2.
The following music tracks will be scanned
for approx. 10 secs. each.
With the TPM function being activated (dis-
play 9 f lights up), the set only samples the
tracks stored in the TPM memory. To conti-
nue listening to the scanned track
press the SCAN knob 2 once again.
The set will then continue to play the
track without any interruption.
The Mix function @
When the Mix function is activated, the CD
tracks will be played in an arbitrary order.
Display 9 c shows “Mix”.
If TPM is on (display 9 f lights up), the set
only plays the tracks stored in the TPM
memory. To skip a title press rocker switch
F.
Press button @ to switch “Mix” on and off.
ARI traffic messages
Certain FM broadcasters transmit regional
traffic messages at regular intervals. The
ARI system makes it a lot easier to find these
stations.
You are listening to a traffic station if “ARI” is
shown in display 9 d.
Activating priority for traffic stations
Selecting this function makes the car radio
mute all other non-traffic-stations. Therefo-
re, to listen to traffic stations only
press the ARI button C.
If the priority for traffic stations is on,
“ARI” lights up in display 9 d.
If you have not tuned in to a traffic station, the
set will send out an audible alarm.
In this case press the seek tuning rok-
ker switch F to let the unit search for
the next traffic station.
Audible alarm
Precondition: Priority for ARI traffic stations
is on (“ARI” lights up in display 9 d).
When you leave the coverage area of the
traffic station and the reception quality beco-
mes too poor, the set will send out an audible
alarm after approximately 30 secs.
This audible alarm will also be produced
immediately after having pressed a preset
key with a non-ARI station allocated to it.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Munchen CD 43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Munchen CD 43 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt Munchen CD 43

Blaupunkt Munchen CD 43 User Manual - German - 16 pages

Blaupunkt Munchen CD 43 User Manual - Dutch - 16 pages

Blaupunkt Munchen CD 43 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info