698911
6
Zoom out
Zoom in
Previous page
1/64
Next page
4
1. Shaving head
2. Housing of the shaving heads
3. Button used to open the housing
of the shaving heads
4. On/Off button
5. Display
6. Trimmer
7. Trimmer lock
8. Socket
9. Charging station
10. Power cord with a adaptor (may be
connected both directly to the shaver and to
the charging station)
CHARGING THE APPLIANCE
If the appliance's battery charge is low or the battery is totally discharged, it needs charging. Insert the
power supply cord into the appliance and connect the power supply unit to the electrical grid.
The charging indicator of the appliance will then display its charging status. If the appliance is totally
discharged, the indication of its charging status may be delayed. This delay should be no longer than 2
minutes.
Having connected the appliance to the charger, you may continue using the appliance. However, do
not use the appliance in the vicinity of baths, showers, swimming pools or similar water tanks.
SHAVER OPERATION
Switch the shaver on with the On/Off button.
Move the shaver across the skin surface, making circular movements.
Clean the shaving head after each use with the provided brush.
The appliance may be used for wet or dry shaving. If you use shaving foam or gel, rinse the shaver
regularly under a stream of tap water to prevent the shaving head from “clogging”.
Note: Each shaver requires the skin and hair growth to adjust to the blade system applied. The first
shaves may not be perfectly accurate and the skin may be irritated. The adjustment period may last up
to 3 weeks.
SHAVER CLEANING
Make sure the appliance is switched off and not connected to the charger.
Clean the shaving film and the shaver blades after each use of the shaver. Use the brush for this
purpose. The blades may be rinsed under running water.
Clean the appliance regularly with due care. Press the button opening the housing of the shaving
heads. Remove all hair from the inside. Turn the ring mounting the blade heads to the left. Remove the
ring. Remove and clean each head and set of blades.
Note: place the blades in the heads they have been removed from (each blade is assigned to a
respective head, and if used in another head, the blade may be less effective or even get damaged).
Having cleaned the heads, place them in the housing along with the blades (pay attention to the cuts
and grooves), insert the mounting ring and close it by turning it to the right.
GROWTH TRIMMING (TRIMMER)
Switch the shaver off. Move the trimmer lock down. The blade of the trimmer will then push out. Switch
the shaver on and trim the hair. Switch the shaver off. To hide the trimmer, push it back into place on
the shaver.
MSR501
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt MSR501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt MSR501 in the language / languages: English, German as an attachment in your email.

The manual is 15,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info