614679
13
Zoom out
Zoom in
Previous page
1/14
Next page
Madeira RCR 85 gb
26
Autoreverse
If, while a tape is playing, you wish to switch
to the other track of that tape:
press FR and FF simultaneously.
At the end of the tape, the set will automati-
cally switch to the other track. The display will
show TR1-PLAY for track 1 or A and TR2-
PLAY for track 2 or B.
Note:
If there is too much tension on the tape during
playback, the set may switch to the other
track by itself. In this case check the condition
of the tape. Sometimes it helps to rewind the
cassette tape completely.
Dolby NR*
With this set you can play cassettes recorded
with or without Dolby NR noise reduction.
Cassettes recorded with Dolby NR* distin-
guish by their reduced background noise and
the improved dynamic characteristics.
To switch Dolby on/off:
press
. When Dolby is on, is indi-
cated on the display.
* Noise reduction system manufactured under license
from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Changing the audio source
with SRC
When you have inserted a cassette, you can
change between tape or radio reproduction.
To switch over,
press the SRC button.
Care of your audio equipment
We recommend that you use only C-60/C-90
cassette tapes in your car radio. Protect your
cassettes from dirt, dust and temperatures
exceeding 50 °C. During cold weather, allow
cold cassettes to warm up somewhat before
playing them in order to avoid uneven tape
transport. Operating problems and sound
distortions may occur after approximately
100 hours of playing time and are caused by
dust particles which adhere to the rubber
roller and the audio head.
Use a cleaner cassette to remove normal dirt
build-up. For tougher cases, use a cotton
swab (Q-tip) soaked with alcohol. Never use
any hard tools to clean your unit!
DSC programming
This car radio offers direct software control
(DSC) to adjust a number of default settings
to your personal needs and store them.
Listed below you will find an overview of such
default settings.
To change a setting,
press DSC.
Then use the rocker switch to select the
functions described in the following and chan-
ge the respective value. The current conditi-
on is indicated on the display.
Select function
Change
setting
Select function
Change
setting
+
LOCAL Seek tuning sensitivity for
local reception
LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity
(lo)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Madeira RCR85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Madeira RCR85 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt Madeira RCR85

Blaupunkt Madeira RCR85 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info