716239
10
Zoom out
Zoom in
Previous page
1/12
Next page
Clearing a Blockage and Changing the Blades
The following instructions describe how to open the machine in the event of a blockage or needing to replace the cutting blades.
WARNING! Ensure the machine is unplugged and the power switch is off before opening machine.
WARNING! Use replacement blades as supplied only by your Blaupunkt dealer.
WARNING! When changing blades always wear suitable gloves.
Loosen the locking screw on the rear of the machine in the direction indicated on the machine.
Holding the top handle slide the white body section of the machine upwards away from the grey lower motor section.
If the machine is blocked, remove the blockage and reassemble.
To change the blades rotate the metal blade wheel and align the inner hex screw holding the blade in place with the hole in
the metal mount.
Using a suitable hex (allen) key slacken the 2 screws holding the blade in place.
Replace the blade and fix into place with the 2 screws.
Rotate the blade wheel 180° and repeat the process with the 2nd blade.
WARNING: It is vitally important that the blades are securely fixed into place before reassembling the machine. Failure to check
could result in death or serious injury.
Once complete replace the top section of the machine ensuring the locking screw is correctly aligned with the hole and
tighten it.
• The 2 sections of the machine will pull together, once tight the operation is complete and the machine is ready to be used
again.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt HSLK 750501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt HSLK 750501 in the language / languages: English, German as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info