614665
14
Zoom out
Zoom in
Previous page
1/15
Next page
29
Coburg CM 62 4/93
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
ARI messages during cassette
operation
This set allows you to listen to a cassette
while maintaining reception of traffic messa-
ges.
When a traffic message is broadcast, cas-
sette playback is stopped and the traffic
message switched through.
Proceed as follows to activate this function:
Use the ARI button B to switch on the
ARI priority. “ARI” is shown in the dis-
play D h if the ARI priority is on.
Tune to a traffic information station of
your area.
Insert the cassette into the cassette
compartment. Now you can listen to
cassette playback, which will be inter-
rupted when a traffic message is bro-
adcast.
Automatic start of search tuning
When you leave the coverage area of the
tuned in traffic broadcast station, making
reception difficult, the set automatically tu-
nes to another traffic information station
when cassette operation is activated. Du-
ring seek tuning the ARI alert sounds.
Selecting the display colour
With DSC 5 the display colour can be
changed from orange to green to adapt it to
the dashboard lighting of your car.
To change the display, proceed as follows:
Press DSC 5.
Press the rocker switch
/ F until
“COLOUR” lights in the display.
Press << >> G to change the colour.
Press DSC 5 to quit.
This function can be adjusted separately for
KeyCard 1 and 2.
Beep (after key operations)
This car radio can release a beep to confirm
those key operations which require more
than 2 seconds before the respective functi-
on is activated. This beep can be switched
on or off.
For this, press the following buttons one
after the other:
DSC 5.
Rocker switch / F until the display
D a shows “BEEP ON” or “BEEP
OFF”.
Press the rocker switch << >> G to
switch between “BEEP ON” and
“BEEP OFF”.
Press DSC 5 to quit.
This function can be adjusted separately for
KeyCard 1 and 2.
Optical indication as theft protection
When your vehicle is stationary, a light emit-
ting diode can flash as optical warning.
Depending on how your car radio is con-
nected, you can adjust one of the following
three states with DSC 5.
Press DSC 5.
Press the rocker switch
/ F until
“LED” and a number is shown in the
display:
LED 1 - The LED flashes, if the car
radio is switched via the igni-
tion.
LED 2 - The LED flashes, if the car
radio is not switched via the
ignition.
LED 0 - The LED diode does not flash.
Select with << >> G.
Press DSC 5 to quit.
This function can be adjusted separately for
KeyCard 1 and 2.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Coburg CM62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Coburg CM62 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt Coburg CM62

Blaupunkt Coburg CM62 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info