614270
6
Zoom out
Zoom in
Previous page
1/36
Next page
6
Placing the device in operation
Removing the control panel
Press the
button
1
to unlock the control
panel.
The left side of the control panel detaches
from the device and is secured by the bracket
against falling out.
Move the control panel slightly to the left
until it disengages from the right bracket.
Carefully remove the control panel from the
left bracket.
Note:
The car sound system automatically switches
o as soon as the control panel is removed.
Setting the reception area
This car sound system is designed for operation in
di erent regions with di erent frequency ranges
and station technologies. The factory default of
the reception area is "EUROPE". In addition, the
reception areas "ASIA", "USA", "S-AMERICA" and
"THAILAND" are available.
Note:
If you operate the car sound system outside of
Europe, you may  rst have to set a suitable re-
ception area in the user menu (see the chap-
ter "User settings", section "Making settings in
the "TUNER" menu", menu item "AREA").
Switching on/o
Switching on/o with the On/O button
For switch-on, press the On/O button
3
.
The car sound system switches on.
To switch o the device, press and hold down
the On/O button
3
for longer than 2 sec-
onds.
The car sound system switches o .
Note:
If you switch on the car sound system while
the vehicle ignition is switched o , it auto-
matically switches o after 1 hour to preserve
the vehicle battery.
Switching on/o via vehicle ignition
The car sound system will switch o /on simulta-
neously with the ignition if the device is correctly
connected to the vehicle
'
s ignition as shown in the
installation instructions and you did not switch
the device o by pressing the On/O button
3
.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o ) to
50 (maximum).
Turn the volume control
4
to change the
volume.
Note:
If a telephone is connected with the car sound
system as described in the installation instruc-
tions, the car sound system is muted in case
of a phone call. During muting, the display
shows "TELEPHONE".
Muting the car sound system (Mute)
Brie y press the On/O button
3
to mute
the car sound system or to reactivate the pre-
vious volume.
During muting, the display shows "MUTE".
Display brightness
You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
Notes:
The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings",
section "Making settings in the "DISPLAY"
menu", menu item "DIM MODE").
The display brightness can be adjusted
separately for day and night (see the chap-
ter "User settings", section "Making set-
tings in the "DISPLAY" menu", menu items
"DIM DAY" and "DIM NIGHT".
Press the DIS button
@
for approx. 2 seconds
to manually switch the display brightness.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt BRISBANE 230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt BRISBANE 230 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt BRISBANE 230

Blaupunkt BRISBANE 230 Usermanual and installation guide - German - 38 pages

Blaupunkt BRISBANE 230 Usermanual and installation guide - Dutch - 38 pages

Blaupunkt BRISBANE 230 Usermanual and installation guide - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info