614666
14
Zoom out
Zoom in
Previous page
1/15
Next page
29
Barcelona CM 102
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
LED 2 - LED only blinks if the car
radio is not connected via
the ignition.
Loudness
Since your in-car sound quality is influenced
by the type of the installation (amplifier), the
type and arrangement of the loudspeakers,
and the vehicle itself, you may individually
programme at which level you want the set to
start boosting the basses (loudness).
For changing this loudness level,
press the DSC button 5.
BEEP ON or BEEP OFF lights up
on the display B a.
Now press the rocker switch
/ E
until Loud and a number between 1
and 6 illuminate on the display B a.
With the rocker switch << / >> D you
can match the above mentioned loud-
ness level to your personal require-
ments.
For memorizing this adjustment,
press the DSC button 5 once again.
Indication of the Station Name
After having selected a station, the corre-
sponding frequency lights up on the display
B a. You can replace this frequency indi-
cation for all stored stations by the respective
name of the station (the German NDR, or
WDR, or BFBS).
Note the following:
The stations have to be stored.
The zone identification for traffic messages
(ARI) is no longer indicated.
For entering a station name, proceed as
follows:
Press the DSC button 5.
BEEP ON or BEEP OFF lights up
on the display B a.
Press the rocker switch
/ E until
PRESET is illuminated on the display
B a.
Choose the desired station (via the
preset buttons), for which the name is
to be entered.
The frequency is indicated on the display
B a. All free digits are represented by das-
hes.
_ _ 89.60 _ _
The first dash is blinking. For changing it and
entering the desired character:
Press the rocker switch << / >> D on
the right continuously.
The frequency indication disappears. Now
the following characters light up one after
another: a dot, the numbers (0 to 9), the
capital letters (A to Z), the blank, and the
special characters (e.g. umlauts and punc-
tuation marks).
For selecting a character:
Press the ON/OFF button 1.
The selected character stops blinking
while the next character starts to flash.
For modifying the previous character:
Press the ON/OFF button 1 for longer
than two seconds.
Once you have finished your entry, press the
corresponding preset button of the next sta-
tion, which you would like to be named. The
entered name for the previous station is then
automatically stored.
For storing the adjustment:
Press the DSC button 5 once again.
Every time the station is selected, the speci-
fied name will be represented on the display.
A memorized station name can be deleted by
storing a new station on this button (i.e.
keeping the respective preset button depres-
sed for a longer period).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Barcelona CM102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Barcelona CM102 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt Barcelona CM102

Blaupunkt Barcelona CM102 User Manual - German - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info