317958
3
Zoom out
Zoom in
Previous page
1/17
Next page
3
Installation instructions (Fig. B & C)
B
Fix the charging base vertically to the wall using the
screws and plugs supplied, as illustrated,and within
reach of a power socket. Plug in and place the product
into position. The charging base can also be fixed, or
simply placed, in a convenient horizontal position.
C
Note: Avoid damaging the cable while fixing the base
to the wall by pushing the wire into the wire trap.
Recharging
From new, the rechargeable cells of the product need a
minimum charge time of 16 hours to ensure full power. We
suggest you fully discharge the product when it is used for the
first time as this will help the cells recharge faster. The switch
must be in the off position; the product will not charge if it
is in any other position. Whilst charging, the charger will get
warm; this is perfectly normal and safe, and your product can
remain on charge indefinitely without damage or danger. It is
not possible to “overcharge” the battery cells with the
charger provided.
Whilst recharging and discharging the VersaPak stick(s) will
become warm, this is perfectly normal and does not effect the
unit in any way.
VP321
A VersaPak stick will charge in either the left or right hand ports
(or both together if a second stick has been purchased). The
charging time is not affected and would still be 16 hours.
VP331
VersaPak sticks will only recharge when both are fitted into the
unit. If only one stick is inserted it will not charge.
How to use (Figs. D & E)
D
To start, slide the on/off switch forward (i.e. 0 = off, I = on).
To stop, slide the switch back.
Burst of power
Where applicable, your product has two power settings;
‘I’ for normal power and ‘MAX’ for a burst of additional
power to do tougher jobs, activated by sliding the switch
forward as far as it will go.
E
Always return the product to its charging base immediately
after use so that it will be ready and fully charged for the
next job. The switch must be in the off position; the
product will not charge if it is in any other position. Ensure
that the product is fully engaged on the charging base.
ENGLISH
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker vp 321 dustbuster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker vp 321 dustbuster in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info