Manual Black Decker KX200K T3 (page 4 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

577929

Zoom out

Zoom in

1/72

ENGLISH

(Original instructions)

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety instructions for heat

guns.

Warning: Do not use outdoors, indoor use only.

Warning: This appliance must be placed on its stand when

not in use.

Warning: A re may result if the appliance is not used with

care, therefore be careful when using the appliance in places

where there are combustible materials.

u Do not apply heat to the same place for a long time.

u Do not use in presence of an explosive atmosphere.

u Be aware that heat may be conducted to combustible

materials that are out of sight.

u Place the appliance on its stand after use and allow it to

cool down before storage.

u Do not leave the appliance unattended when it is switched

on.

u Do not obstruct either the air intake slots or the nozzle

outlet as this may cause excessive heat build up resulting

in damage to the appliance.

u Do not direct the hot air ow at other people or animals.

u Do not touch the nozzle as it becomes very hot during use

and remains hot for up to 30 minutes after use.

u Do not place the nozzle against any object during or im-

mediately after use.

u Do not poke anything down the nozzle as it could give you

an electric shock.

u Do not look down the nozzle while the appliance is

switched on.

u Do not use the appliance as a hair dryer! The air tempera-

ture is far higher than a hardware.

u Ensure adequate ventilation during use as toxic fumes

may be produced.

u Do not use the appliance in a damp atmosphere.

u When stripping paint, ensure that the work area is

enclosed. Wear a dust mask specically designed for

protection against lead paint dust and fumes and ensure

that persons within or entering the work area are also

protected.

u Do not burn paint, as it could cause a re hazard.

u Do not allow paint to adhere to the nozzle as it could ignite

after some time.

u Switch off the appliance and allow it to cool before tting

any accessory.

Stripping lead-based paint

u Extreme care should be taken when stripping paint. The

peelings, residue and vapours of paint may contain lead,

which is poisonous. Any pre-1960 building may in the

past have been painted with paint containing lead. This

paint may be covered with additional layers of paint. Once

deposited on surfaces, hand to mouth contact can result in

the ingestion of lead.

u Exposures to even low levels of lead can cause irrevers-

ible brain and nervous system damage. The greatest

danger of lead poisoning is to children and pregnant

women.

u Before starting work, it is important to determine whether

the paint to be stripped contains lead. This can be done

using a test kit or by a professional decorator. Do not

smoke, eat or drink in a work area that could or may be

contaminated by lead. Lead based paints should only be

removed by a professional and should not be removed

using a heat gun.

Safety of others

u This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their

safety.

u Children should be supervised to ensure that they do not

play with the appliance.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KX200K T3 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KX200K T3 Manual

Product: