Manual Black Decker KX1800 T1 (page 4 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

577927

Zoom out

Zoom in

1/64

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Electrical safety

This product must be earthed. Always check that the

power supply corresponds to the voltage on the

rating plate.

Extension cables & class 1 product

◆ A 3 core cable must be used as your tool is earthed and of

class 1 construction.

◆ Up to 30m (100 ft) can be used without loss of power.

Voltage drops

Inrush currents cause short-time voltage drops. Under

unfavourable power supply conditions, other equipment may be

affected. For example, artificial lighting will show a temporary

drop in magnitude when the machine is switched on.

If the system impedance of the power supply is lower than

0.19 ø, disturbances are unlikely to occur.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for heatguns

◆ Warning! This tool is not intended for use by young or

infirm persons. Children must be supervised to ensure

they do not touch the tool.

◆ Warning! Always place the tool in the stand position

when not in use.

◆ A fire may result if the tool is not operated carefully,

therefore always use the tool with care and attention.

◆ Do not obstruct either the air intake slots or the nozzle

outlet as this may cause excessive heat build up resulting

in damage to the tool.

◆ Be careful when using the appliance in places where

there are combustable materials.

◆ Do not direct the hot air flow at other people or animals.

◆ Do not touch the nozzle as it becomes very hot during use

and remains hot for up to 30 minutes after use.

◆ Do not place the nozzle against any object during or

immediately after use.

◆ Do not poke anything down the nozzle as it could give you

an electric shock.

◆ Do not look down the nozzle while the tool is switched on.

◆ Do not use the tool as a hairdryer! The air temperature is

far higher than a hairdryer.

◆ Ensure adequate ventilation during use as toxic fumes

may be produced.

◆ Do not use the tool in a damp atmosphere.

◆ Be aware that heat may be conducted to combustible

materials that are out of sight. Spaces behind boards,

ceilings and floors and wall cavities in timber frame

constructed houses can contain flammable materials.

Check before starting work.

◆ Do not use in presence of an explosive atmosphere; i.e.

Do not use the tool where flammable gases, liquids or

materials may be present.

◆ When stripping paint, ensure that the work area is

enclosed. Wear a dust mask specifically designed for

protection against lead paint dust and fumes and ensure

that persons within or entering the work area are also

protected.

◆ Do not burn paint. as it could cause a fire hazard.

◆ Do not allow paint to adhere to the nozzle as it could

ignite after some time.

◆ Do not apply heat to the same place for a long time

◆ Do not leave the appliance unattended when it is switched

on or when cooling down.

◆ Switch off he tool and allow it to cool before fitting any

accessory.

◆ Allow the tool to cool down fully before storing.

Stripping lead-based paint

Extreme care should be taken when stripping paint.

The peelings, residue and vapours of paint may contain lead,

which is poisonous. Any pre-1960 building may in the past have

been painted with paint containing lead. This paint may be

covered with additional layers of paint. Once deposited on surfaces,

hand to mouth contact can result in the ingestion of lead.

Exposures to even low levels of lead can cause irreversible

brain and nervous system damage. The greatest danger of

lead poisoning is to children and pregnant women.

Before starting work, it is important to determine whether the

paint to be stripped contains lead. This can be done using a

test kit or by a professional decorator. Do not smoke, eat or

drink in a work area that could or may be contaminated by

lead. Lead based paints should only be removed by a

professional and should not be removed using a heatgun.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KX1800 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KX1800 T1

Black Decker KX1800 T1 User Manual - Polish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KX1800 T1 Manual

Product: