527493

Black Decker GW3030 Manual

9
Zoom out
Zoom in
Previous page
1/124
Next page
9
ENGLISH
(Original instructions)
Features
1. Variable speed control
2. Cable restraint
3. Collection bag
4. Upper blow tube
5. Lower blow tube
6. Upper vacuum tube
7. Middle vacuum tube
8. Lower vacuum tube
9. Vac release button
10. Bag release button
11. Powerhead
12. Second handle
Assembly
@
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
@
Warning! Always wear protective gloves when
working with your blow vac.
Vacuum tube assembly (g. A)
The vacuum tubes must be assembled together before use.
Warning! Do not operate the appliance with the vacuum
tubes separated.
u To ease assembly, apply a soapy water solution to the
joint area.
u Align the notches (13) and the triangles (14) on the upper
(6) and middle (7) vacuum tubes.
u Push the upper vacuum tube (6) rmly onto the middle
vacuum tube (7) until the triangles click into place.
u Align the notches (13) and the triangles (14) on the middle
(7) and lower (8) vacuum tubes.
u Push the middle vacuum tube (7) rmly onto the lower
vacuum tube (8) until the triangles click into place.
Warning! Do not separate the tubes once assembled.
Attaching the second handle (g. B) (GW3050 Only)
u Press in and hold both of the buttons (15) on the side of
the handle mount.
u Slide the second handle (12) in place over the buttons
(15).
Note: Ensure that the orange button is is on the same side as
the large hole in the handle.
Warning! Ensure that the teeth on the button are correctly
aligned in slots in the handle and that the handle is secure.
Adjusting the position of the second handle (g. C)
(GW3050 Only)
The second handle (12) can be adjusted to provide optimum
balance and comfort.
u Press in the button (15) on the left side of the handle.
u Rotate the second handle (12) into the required position.
u Release the button (15).
Warning! Ensure that the teeth on the button are correctly
aligned in slots in the handle and that the handle is secure.
Blow tube assembly (g. D)
u Align the 2 markers (16) on bottom of the upper blow tube
(4) and the 2 markers (17) on the bottom of the lower blow
tube (5).
u Push the upper blow tube (4) rmly into the lower blow
tube (5) until they click into place.
Warning! Do not separate the tubes once assembled.
Fitting and removing the concentrator (g. D)
u Slide the concentrator (30) rmly onto the bottom end of
the lower blow tube (5). Secure the concentrator by cliping
the tab (31) onto the clip (32)
u To remove, lift the clip (32) and slide the concentrator (8)
off the bottom of the lower blow tube(5).
Fitting and removing the rake (g. E) (GW3050
Only)
u Position the rake (18) above the mount (19) on the bottom
of the lower blow tube (5).
u Push down and slide the rake (18) rmly onto the mount
(19) until it clicks into place.
u To remove, lift the rake release (20) and slide the rake
(18) off the mount (19).
Use
Switching on and off (g. F)
Warning! Grip the product rmly when switching on.
u To switch the appliance on, turn the variable speed control
(1) clockwise to the required setting.
u To switch the appliance off, turn the variable speed
control (1) anti-clockwise to the off position.
Cable restraint (g. G)
A cable restraint (2) is incorporated into the rear of the
powerhead.
u Loop the cable (21) through the cable restraint (2).
Using your product
Warning! When using as a blower or vacuum, always wear
safety glasses. If using in dusty conditions, wear a lter mask
as well.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GW3030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GW3030 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info