Manual Black Decker GTC390 (page 6 of 62) (English, German, Dutch, French, Italian, Portuguese, Spanish)

665799

Zoom out

Zoom in

1/62

• Always be sure of your footing,

particularly on slopes

• Do not cut on excessively steep slopes

and always wear non-slip footwear.

• Walk, never run. Do not force the machine.

• Never operate the machine with

defective or missing guides or shields.

Maintenance and storage

• Store your machine in a dry place when

not in use, out of the reach of children.

• Do not use solvents or cleaning fluids to

clean your machine. Always remove the

battery pack before cleaning

• Do not operate your machine if any parts

are defective; discard all defective parts

and fit new parts before use.

• Keep all nuts, bolts and screws tight

to be sure your machine is in a safe

working condition.

• Use only Black & Decker recommended

replacement parts and accessories.

Wall mounting the blade sheath (Fig. B)

• For safer convenient storage of your

hedgetrimmer the blade sheath can be

permanently fixed to a wall via the two

mounting holes (11). Additionally, this

allows you to partially fill the blade sheath

with a mixture of 2 parts paraffin

(0.2 litres) to 1 part automotive oil to

standard SAE 20 (0.1 litres) to lubricate

the blades and protect against corrosion.

• Simply drill two 6mm holes by 36mm

deep in the appropriate position, insert

wall plugs and secure the blade sheath

to the wall with the screws provided.

Energy pack (Fig. C)

Fitting the energy pack

• Line up the energy pack with your

hedgetrimmer body. Now slide the energy

pack firmly into your hedgetrimmer until

you here the lock snap into place.

Removing the energy pack

• Press both release buttons (7) and at the

same time pulling the energy pack out of

your hedgetrimmer.

Operating your hedgetrimmer (Fig. D)

The energy pack (9) is supplied discharged

so you must charge it in preparation for

hedgetrimming. Refer to your charger

instruction section at the end of this section

and follow the charging procedure.

Preparation

• Unpacking the unit - residual charge:

The energy pack (9) may contain some

residual charge. Should you insert the

pack into the unit, be aware that it is

capable of operation.

• Please remove tie tag before use.

• To protect your feet, always wear stout

shoes or boots.

• Use protective equipment. Wear safety

spectacles or goggles and heavy duty

gloves whilst operating your machine.

• Use ear protection if the sound level

seems uncomfortable when using your

machine.

• Do not operate your machine barefoot or

in sandals.

• Do not wear loose jewellery.

• Clothes should be close fitting but not

restrict your movement.

• Always be sure your machine is in a safe

operating condition.

• Before using your machine, remove the

battery pack and visually check that the

blade fixings are secure. A damaged

blade or worn blades are major hazards

and must be replaced.

• Ensure hedges etc. are free from foreign

objects such as railings or barbed wire

which may damage your machine.

Operation

Release switch lever to turn machine off

and remove battery pack:

• Whenever you leave your machine

unattended.

• Before checking, cleaning, adjusting, or

working on the machine.

• Before clearing a blockage.

• If the machine starts to vibrate

abnormally (check immediately).

• After striking a foreign object. Inspect the

machine for damage and make repairs

as necessary.

• Never attempt to stop the blades -

always allow them to stop on their own.

• Do not put hands or feet near blades.

• Start the machine carefully according to

the instructions and with your body well

away from the blades.

• Do not use your machine in the rain and

do not allow it to get wet. Avoid using the

machine in wet conditions.

• Use your machine only in daylight or

good artificial light.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC390 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GTC390 Manual

Product: