Manual Black Decker GTC1843L (page 7 of 112) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709511

Zoom out

Zoom in

1/112

ENGLISH

(Original instructions)

♦ Do not charge damaged batteries.

♦ Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries, carefully wipe the

liquid off using a cloth. Avoid skin contact.

♦ In case of skin or eye contact, follow the instructions

below.

Warning! The battery uid may cause personal injury or

damage to property. In case of skin contact, immediately

rinse with water. If redness, pain or irritation occurs

seek medical attention. In case of eye contact, rinse

immediately with clean water and seek medical attention.

Chargers

Warning! Your charger has been designed for a

specic voltage. Always check that the mains voltage

corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a

regular mains plug.

♦ Use your Black & Decker charger only to charge the

battery in the appliance/tool with which it was supplied.

Other batteries could burst, causing personal injury and

damage.

♦ Never attempt to charge non-rechargeable batteries.

♦ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

♦ Do not expose the charger to water.

♦ Do not open the charger.

♦ Do not probe the charger.

♦ The charger must be placed in a well ventilated area

when charging.

Symbols on the charger

The following symbols are found on your charger:

Your charger is double insulated; therefore no

earth wire is required. Always check that the

mains voltage corresponds to the voltage on the

rating plate. Never attempt to replace the charger

unit with a regular mains plug.

If the cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker

Service Centre in order to avoid a hazard.

The charger is intended for indoor use only.

Read the instruction manual before use.

Features

1. On/off switch

2. Lock-off button

3. Main handle

4. Trimmer head

5. Blade

6. Blade sheath

7. Battery

Fig. A

8. Charger

9. Charging indicator

Assembly

Warning! To prevent accidental operation, ensure that the

battery is removed and that the blade sheath is in place on the

blades before performing the following operations. Failure to

do this could result in serious personal injury.

Fitting and removing the trimmer head (g. C)

Fitting the trimmer head

♦ Align the groove on the outside of the coupling end of the

handle (3) with the tongue on the inside of the coupling

end of the trimmer head (4).

♦ Push the trimmer head (4) onto the handle (3).

♦ Slide the collar (11) down and rotate it clockwise until it is

fully tightened.

Warning! Periodically check the connections to ensure that

they are tightened securely. The collar is correctly secured if

there are no orange threads visible.

Removing the trimmer head

♦ Rest the handle (3) on the ground, loosen the collar (11)

and take off the trimmer head (4).

Adjusting the trimmer head angle (g. D)

The trimmer head pivots 180° and can be locked into 5

positions within that range.

Warning! To avoid being pinched, wear gloves and hold the

unit as shown.

♦ Rest the handle (3) on the ground, slide the collar (12)

down and move the trimmer head (4) as required. Make

sure the trimmer head clicks into place.

Fitting and removing the battery (g. B)

♦ To t the battery (7), line it up with the receptacle on the

tool. Slide the battery into the receptacle and push until

the battery snaps into place.

♦ To remove the battery, push the release button (10) while

at the same time pulling the battery out of the receptacle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GTC1843L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GTC1843L Manual

Product: