585844
5
Zoom out
Zoom in
Previous page
1/124
Next page
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tools operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool
bits etc., in accordance with these instruc-
tions, taking into account the working condi-
tions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
Battery tool use and care
Recharge only with the charger specied by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of
re when used with another battery pack.
Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and
re.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws, or other
small metal objects, that can make a con-
nection from one terminal to another. Short-
ing the battery terminals together may cause
burns or a re.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by a qualied
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
Additional safety instructions for pole
pruners
The intended use is described in this instruction
manual. Do not use the tool for purposes not
intended; for example do not use the tool to fell
trees. The use of any accessory or attachment or
performance of any operation with this tool other
than those recommended in this instruction manual
may present a risk of personal injury.
Wear close tting and protective clothing
including a safety helmet with visor/goggles, ear
protectors, non-skid safety footwear, protective
bib trousers and strong leather gloves.
Always position yourself out of the path of
falling branches.
The safe distance between a branch to be
felled and bystanders, buildings and other
objects is at least 2 1/2 times the length of the
branch. Any bystander, building or object within
this distance is at risk from being struck by the
falling branch.
Pre-plan a safe exit from falling trees or
branches. Ensure the exit route is clear
of obstacles that would prevent or hinder
movement. Remember wet grass and freshly
cut bark is slippery.
Ensure someone is nearby (but at a safe
distance) in case of an accident.
Do not use the tool while standing in a tree, on
a ladder or on any other unstable surface.
Keep proper footing and balance at all times.
Hold the tool rmly with both hands when the
motor is running.
Do not let the moving chain contact any object
at the tip of the guide bar.
Start cutting only with the chain moving at full
speed.
Do not attempt to enter a previous cut. Always
make a fresh cut.
Watch for shifting branches or other forces that
could close a cut and pinch or fall into the chain.
5
ENGLISH
(Original instructions)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GPC1800P TH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GPC1800P TH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GPC1800P TH1

Black Decker GPC1800P TH1 Quick start guide - English - 16 pages

Black Decker GPC1800P TH1 User Manual - Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info