583267
1
Zoom out
Zoom in
Previous page
1/10
Next page
2
Safety instructions
Read all of this manual carefully, observing all
the recommended safety instructions before,
during and after using your machine. Maintain
your machine in good working order.
Familiarise yourself with the controls on your
machine before attempting to operate it, but
above all, be sure you know how to stop
your machine in an emergency.
Retain this manual and all other literature
supplied with your machine for future reference.
Electrical connection
Your machine is designed for use on
AC (mains) electrical supplies only. Do
not attempt to use on any other supply.
Plug your machine into a power point,
never in a light socket.
Do not leave your machine
unattended whilst it is connected to
the electrical supply.
Always switch off and remove the
plug from the mains before cleaning,
inspecting or adjusting any part of the
trimmer, or if the supply cable has
become damaged or entangled.
Power supply cord
The power supply cord should be
regularly inspected for signs of damage or
ageing and only used if in good condition.
Always keep the power supply cord
away from the cutting line (5), be aware
of its position at all times.
Never carry your machine by the cord or
jerk the cord to separate the connectors.
Keep the cord away from heat, oils and
sharp edges.
Have damaged cords replaced
completely by your nearest Black & Decker
service centre. Do not attempt to do this
yourself as the switch handle is not
customer serviceable.
Cutting line
Take care against injury from line trimming
blade (7) during unpacking and assembly
and any excess line which may be cut off
when the trimmer is first operated.
The cutting line (5) will continue to run for
a short time after releasing the switch
lever. Under no circumstances should
Trimmer
GL570/GL580 Instruction Manual
Congratulations!
Your purchase of this Black & Decker Reflex® trimmer
assures you of years of problem free trimming. The
Reflex® not only trim ’n’ edges your lawn, it also has
a unique totally automatic line feed system. You do
nothing - the Reflex® system means non-stop
trimming; by the use of a simple mechanism it
senses when the line has worn and, when needed,
automatically feeds out line to its optimum cutting
length. You just switch the unit on and trim.
Description
Following is a list of the parts that will be mentioned
in this instruction leaflet and are shown in the
appropriate diagrams:
1Body (1)
Secondary handle (2)
Supply cord restraint (3)
Locking ring (4)
Cutting line (5)
Guard (6)
Line trimming blade (7)
Edge guide (9)
Cable storage hooks (11)
Hanging hole (18)
Power inlet or supply cord (19)
Switch handle (20)
Trigger switch (21)
Arrow (24)
Skid (25)
Pedal (26)
Button (27)
2Guard retaining lugs (10)
Guard screw (22)
Guard screw hole (23)
4Spool cover (8)
Spool housing (12)
Spool cover tab (13)
Eyelet (15)
5Spool (17)
6Arrow (16)
7Lever (14)
!
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GL580C T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL580C T1 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GL580C T1

Black Decker GL580C T1 User Manual - English, German, Dutch - 50 pages

Black Decker GL580C T1 User Manual - Danish - 20 pages

Black Decker GL580C T1 User Manual - French, Italian, Portuguese - 50 pages

Black Decker GL580C T1 User Manual - Swedish - 20 pages

Black Decker GL580C T1 User Manual - Spanish - 50 pages

Black Decker GL580C T1 User Manual - Norwegian, Finnish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info