Manual Black Decker GL570C T1 (page 1 of 50) (English, German, Dutch, French, Italian, Portuguese, Spanish)

583266

Zoom out

Zoom in

1/50

Trimmer

GL570/GL580

Safety instructions

Read all of this manual carefully, observing all the

recommended safety instructions before, during and

after using your machine. Maintain your machine in

good working order.

Familiarise yourself with the controls on your machine

before attempting to operate it, but above all, be sure

you know how to stop your machine in an emergency.

Retain this manual and all other literature supplied

with your machine for future reference.

Electrical connection

• Your machine is designed for use on AC (mains)

electrical supplies only. Do not attempt to use on

any other supply.

• Plug your machine into a power point, never in a

light socket.

• Do not leave your machine unattended whilst it is

connected to the electrical supply.

• Always switch off and remove the plug from the

mains before cleaning, inspecting or adjusting

any part of the trimmer, or if the supply cable has

become damaged or entangled.

Power supply cable

• The power supply cable should be regularly

inspected for signs of damage or ageing and

only used if in good condition.

• Always keep the power supply cable away from

the cutting line (5), be aware of its position at

all times.

• Never carry your machine by the cable or jerk the

cable to separate the connectors. Keep the

cable away from heat, oils and sharp edges.

• Have damaged cables replaced completely by

your nearest Black & Decker service centre. Do

not attempt to do this yourself as the switch

handle is not customer serviceable.

• When fitting a replacement rewireable plug

neither wire of the supply cable should be

connected to the earth terminal.

Cutting line

• Take care against injury from line trimming blade

(7) during unpacking and assembly and any

excess line which may be cut off when the

trimmer is first operated.

• The cutting line (5) will continue to run for a short

time after releasing the switch lever. Under no

circumstances should you attempt to stop the

cutting line, always allow it to stop on its own.

Instruction Manual

Congratulations!

Your purchase of this Black & Decker Reflex

trimmer

assures you of years of problem free trimming. The

Reflex

not only trim ’n’ edges your lawn, it also has

a unique totally automatic line feed system. You do

nothing - the Reflex

system means non-stop

trimming; by the use of a simple mechanism it

senses when the line has worn and, when needed,

automatically feeds out line to its optimum cutting

length. You just switch the unit on and trim.

Description

Following is a list of the parts that will be mentioned

in this instruction leaflet and are shown in the

appropriate diagrams:

1. Body

2. Secondary handle

3. Cable restraint

4. Locking ring

5. Cutting line

6. Guard

7. Line trimming blade

8. Spool cover

9. Edge guide

10. Guard retaining lugs

11. Cable storage hooks

12. Spool housing

13. Spool cover tab

14. Lever

15. Eyelet

16. Arrow

17. Spool

18. Hanging hole

19. Power inlet or cable

20. Switch handle

21. Trigger switch

22. Guard screw

23. Guard screw hole

24. Arrow

25. Skid

26. Pedal

27. Button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL570C T1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GL570C T1

Black Decker GL570C T1 Quick start guide - English - 10 pages

Black Decker GL570C T1 User Manual - Danish, Swedish, Norwegian, Finnish - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GL570C T1 Manual

Product: