586416
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
Emptying the dust bowl (fig. H & I)
When the dust bowl is full or the filter is clogged, the bowl
should be emptied. Always empty the dust bowl into a waste
bin outdoors.
FV750
Release the bowl (4) by pushing the button (16) forward.
While keeping the button in forward position remove the
bowl from the appliance.
Take the filter (17) out of the dust bowl.
Empty the dust bowl.
Refit the filter.
Refit the dust bowl into the appliance. Make sure the dust
bowl clicks into place.
FV850
Release the bowl (4) by pushing the button (16) forward.
While keeping the button in forward position remove the
bowl from the appliance.
Take the filter holder (18) out of the dust bowl.
Empty the dust bowl.
Open the cover (19) as shown (fig. I).
Pull the filter (17) out of the filter holder (19).
Refit the filter.
Refit the cover
Refit the dust bowl into the appliance. Make sure the dust
bowl clicks into place.
Cleaning, maintenance and storage
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Frequently clean the filter to avoid overheating.
Regularly clean the ventilation slots in your tool using a
soft brush.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Cleaning the dust bowl and the filter (fig. H & I)
The filter is reusable and should be cleaned frequently.
It should be replaced when it is worn or damaged.
Empty the dust bowl as described above.
Brush any loose dust off the filter (17).
Wash the filter and the dust bowl in warm, soapy water.
Make sure that the dust bowl and the filter are
completely dry.
Refit the filter.
Refit the dust bowl into the appliance. Make sure the dust
bowl clicks into place.
FV850 - Replacing the HEPA filter (fig. I)
The HEPA filter reduces the amount of dust exiting the motor
housing to a minimum. The filter should be replaced whenever
worn or damaged. Replacement filters are available from your
Black & Decker dealer.
Empty the dust bowl as described above.
Open the cover (19).
Remove the old filter (17).
Insert the new filter as shown.
Refit the cover.
Refit the dust bowl into the appliance. Make sure the dust
bowl clicks into place.
Storing the appliance (fig. J)
Place the appliance in an upright position.
Fold the handle (3).
Set the hook (20) to the up position (A).
Wind the cord around the upper and the lower hook.
To release the cord:
Set the hook (18) to the down position (B) or raise the handle.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker FV750 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker FV750 T1 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker FV750 T1

Black Decker FV750 T1 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish - 56 pages

Black Decker FV750 T1 User Manual - Turkish - 12 pages

Black Decker FV750 T1 User Manual - Turkish, Spanish, Spanish, Norwegian, Finnish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info