316233
5
Zoom out
Zoom in
Previous page
1/72
Next page
5
ENGLISH
4. Filter cleaning wheel (CV9605S)
5. Charging indicator
6. Connector
7. Upper tube
8. Lower tube
9. Floor head
10. Brush actuator switches
Fig. A
11. Crevice tool
12. Brush tool
Installation
Fitting the charging base to the wall
(fig. B)
The charging base can be placed on a
worktop or fitted to the wall to provide
a convenient storage and charging point
for the appliance.
Assembly
Fitting the tubes and the floor head
(fig. C)
Fit the connector (6) on to the nose
of the appliance.
Fit the upper (7) and lower (8) tubes
together and attach the floor head (9)
to one end of the tube.
Attach the other end of the tube to
the connector on the nose of the
appliance.
Alternatively, to use as a hand-held
cleaner with brush on stairs and
furniture, attach the floor head
directly on to the connector.
Fitting the accessories (fig. A & D)
These models are supplied with the
following accessories:
- a crevice tool (11) for confined spaces
- a brush tool (12) for furniture and
stairs
To fit an accessory, proceed as follows:
Take the accessories from the
appliance.
Insert the appropriate accessory into
the front of the appliance.
Use
Before first use, the battery must be
charged for at least 16 hours.
Place the appliance on the charging
base whenever it is not in use.
Charging the battery (fig. B)
Make sure that the appliance is
switched off. The battery will not be
charged with the on/off switch in the
on position.
Place the appliance on the charging
base as shown.
Plug in the charger. Switch on at the
mains.
The charging indicator (5) will be lit.
Leave the appliance to charge for at
least 16 hours.
Whilst charging, the charger may become
warm. This is normal and does not
indicate a problem. The appliance can be
left connected to the charger indefinitely.
The charging indicator will be lit as long
as the appliance is connected to the
plugged-in charger.
Warning! Do not charge the battery at
ambient temperatures below 4 °C or
above 40 °C.
Switching on and off (fig. E)
To switch the appliance on, slide the
on/off switch (1) forward.
To switch the appliance off, slide the
on/off switch back.
Optimising the suction force (fig. F)
In order to keep the suction force
optimised, the filter must be cleared
regularly during use.
Rotate the wheel (4) a few turns to
shake out dust clogging the filter (13).
Activating the brush
Use the switches (10) on the floor
head (9) to lower or raise the bristles
on the brush.
Lower the bristles for cleaning
carpets or rugs.
Raise the bristles for cleaning hard
floors, such as wood, tile or marble.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker fcv 7205 k cyclonic dustbuster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker fcv 7205 k cyclonic dustbuster in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info