582253

Black Decker DC75 T1 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
4
ENGLISH
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
To avoid the risk of electric shock, do not immerse the cord,
plug or appliance in water or other liquid.
Features
1. On/off switch
2. Lid
3. Spout
4. Maximum fill mark
5. Water level indicator
6. Power on indicator
7. Kettle base
8. Handle
Before first use
XRemove all packaging from the appliance,
XClean the appliance before first use.
XFill the kettle with cold water to the maximum fill
mark (4). Do not over fill as described below.
XClose the lid (2). Boil the water as described below.
XDiscard the boiled water and repeat the procedure.
Use
Warning! Always place the appliance on a flat, clean and
non-slip surface before operating it.
Warning! Always check the water level while using the
appliance. Never use the appliance without sufficient water.
Boiling water
XPlace the kettle base (7) on a suitable surface.
XTake the kettle to a water outlet. Remove the lid (2).
XFill the kettle with cold water to the desired level. Do not
over fill.
XTo prevent dry-boiling fill to at least 250 ml (one cup).
XDo not fill the kettle beyond the maximum fill mark (4). If
the kettle is overfilled, boiling water may be ejected from
the spout.
XReplace the lid (2) and make sure it snaps into place.
XPlace the kettle on the kettle base (7).
XInsert the plug and switch the on/off switch (1) to the on
position (I).
XThe power on indicator (6) will light.
XThe water will start boiling, making a rumbling noise. Do
not open the lid when the water is boiling.
XAs soon as the water has boiled, the appliance will
switch off. power on indicator (6) will go out.
XTo switch the appliance off during boiling, press the on/
off switch (1) the off position (O).
XIf you do not want to use the boiled water immediately,
the kettle may be left on the base. If you want to bring
the water back to boil after a while, switch the on/off
switch (1) to on again.
Pouring boiled water
XMake sure the appliance is switched off.
XTake the kettle off the base.
XTo avoid scalding, tilt the kettle slowly to pour the boiled
water.
XAfter pouring, place the kettle back on the base and
remove the plug from the socket.
Cleaning and maintenance
Warning! Before cleaning and maintenance, switch the
appliance off, remove the plug from the socket and allow the
appliance to cool.
Warning! Do not immerse the appliance, the base, the cord
set or the plug in water or any other liquid.
XWipe the exterior with a damp cloth.
XDo not use scouring pads.
XIf necessary, use a mild detergent to remove spots. Do
not use any abrasive or solvent based cleaner.
Descaling the appliance
If the appliance is used in an area with hard water, it is
advised to descale the appliance from time to time.
XHalf fill the kettle with cold tap water.
XAdd 30 ml of white vinegar.
XBoil the mixture and allow it to stand for 30 seconds.
XRepeat this procedure 2 or 3 times.
XThoroughly rinse the kettle.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker DC75 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker DC75 T1 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info