581337
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
X Digital cameras and video cameras
X Laptops
Connecting devices to your inverter
AC devices
The power inverter is equipped with a standard mains
socket (1). Plug the cord from the equipment you wish to
operate into the mains socket (1). Make sure that the load
requirement of your equipment does not exceed the rated
wattage indicated on the unit.
Note: Some power supplies may not operate with this
inverter due to the inrush currents required to start those
devices. The inverter will shutdown in overload mode.
USB devices
The power inverter is equipped with a standard USB port (6).
X Plug the USB connector from the equipment you wish to
operate into the USB port (6).
The power inverter is fitted with overload protection and will
shutdown if a load in excess of the rated load is applied.
To restart the appliance after a shutdown due to overloading,
remove the overload and reset by disconnecting from the dc
power source and then reconnect.
Warning! This appliance will not operate high wattage
appliances or equipment that produce heat, such as hair
dryers, microwave ovens and toasters.
Protective features of the power inverter
Your appliance monitors the following potentially hazardous
conditions:
X Low voltage protection. This condition is not harmful
to the appliance but could damage the power source.
The appliance will automatically shut down when the
input voltage drops to 10.5 +/- 0.5 Vdc. When the
conditions are corrected, disconnect from the dc power
source and reconnect.
X Over voltage protection. The power inverter will
automatically shutdown when the input voltage exceeds
1
6.75 Vdc +/- 0.25 V. When the conditions are corrected,
disconnect from the dc power source and reconnect.
X Short circuit protection. A reverse polarity or short
circuit condition may cause external or internal fuses to
open and may cause irreversible damage to the
appliance. Take extra care to insure a correct polarity
connection.
X Overload protection. The power inverter will
automatically shut down when the continuous load
exceeds the rated wattage. When the overload is
removed, reset the appliance by disconnecting from the
dc power source and reconnecting.
X Over temperature protection. If the temperature
inside the appliance is too high, the appliance will
automatically shut down. Allow the appliance to cool for
at least 15 minutes before restarting after a heat-related
shutdown. Unplug the appliance while cooling.
Hints for optimum use
For best results, the appliance should be placed on a flat
and/or solid surface. The appliance should only be used in
locations that meet the following criteria:
X DRY - Do not allow water or other liquids to come into
contact with the appliance.
X COOL - The surrounding air temperature should be
between 4°C and 40°C (39°F and 105°F). Ideally
between 15°C and 25°C (60°F and 80°F). Keep the
appliance away from direct sunlight, when possible.
X WELL VENTILATED - Keep the area surrounding the
appliance clear to ensure free air circulation.
X Do not place items on or over the appliance during
operation. The appliance will shut down if the internal
temperature gets too hot.
X SAFE - Do not use the appliance near flammable
materials or in any locations that may accumulate
flammable fumes or gases. This is an electrical
appliance that can briefly spark when electrical
connections are made or broken.
Warning! Rechargeable devices - Some rechargeable
devices do not operate well from a modified sine wave
inverter. They only operate correctly from a standard
household outlet which provides a pure sine wave.
Therefore, the manufacturer recommends that you operate
these type of devices from a standard household outlet only,
not from the appliance.
This problem does not occur with the majority of battery
operated equipment. Most of these devices use a separate
charger or transformer that is plugged into an ac mains
socket. The appliance is easily capable of running most
chargers and transformers.
Troubleshooting
If the appliance is on but there is no ac output and the green
power LED indicator (5) is not lit:
X Check that all the dc connections are connected
correctly.
X Check the tightness of the dc connections.
If the appliance is on and the appliance does not function but
the red power LED indicator (5) is lit, one of the following
conditions has occurred:
X Low battery voltage
X Over voltage protection
X Short circuit
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDPC100A T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDPC100A T2 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDPC100A T2

Black Decker BDPC100A T2 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info