53591
4
Zoom out
Zoom in
Previous page
1/52
Next page
4
ENGLISH
Fig. A
8. Set key
9. Measurement system key
10. Memory recall key
11. Multiply key
12. Add key
13. Subtract key
14. Store key
15. Sum key
Assembly
Fitting the battery (fig. B)
Remove the battery cover (7) from the tool.
Connect the battery to the connector. The larger battery
terminal connects to the smaller connector terminal.
Refit the cover and let it click into place.
Use
Setting the tool (fig. A, C & E)
The tool can show the results measured from either the front
(18) or the back (19).
To switch from one measurement method to the other,
press key (8).
Setting the measuring head (fig. E)
Turn the measuring head. Do not set the head at
intermediate angels, as this will lead to inaccurate results.
Selecting the measurement system (fig. A & D)
The appliance can show the results both in the metrical (16)
and the imperial system (17).
To switch from one measurement system to the other,
press key (9).
Memory function (fig. A & D)
The use of the memory function (20) is indicated on the display.
Press key (14) to store the value on the display in the
memory. The value remains stored as long as the
appliance is switched on.
Press key (14) again to clear the memory.
Switching on and off (fig. B)
To switch the tool on, slide the on/off switch (1) to
postion I.
To switch the tool off, slide the on/off switch to position 0.
Measuring (fig. A)
Hold the tool at the required position with the measuring
head aimed at the opposite surface.
Press key (5). The result appears on the display (4).
Note:
- During a measurement the laser dot helps identifying the
opposite surface.
- After 15 seconds of inactivity the LCD screen will go
blank. The last measurement data will not be retrieved
unless it has been stored in the memory.
Measuring distances (fig. A)
Measure the first distance
Press key (12).
Measure the following distance.
Repeat the previous instruction as many times as required
for the remaining distances.
Press key (15). The result appears on the display (4).
Measuring areas (fig. A)
Measure the length.
Press key (11).
Measure the width.
Press key (15). The result appears on the display (4) in
square units.
Measuring volumes (fig. A)
Measure the length.
Press key (11).
Measure the width.
Press key (11).
Measure the height.
Press key (15). The result appears on the display (4) in
cubic units.
Hints for optimum use
Use the tool only in an open space, without obstacles in
the measuring path.
During a measurement avoid moving the tool until the
distance is displayed.
To ensure a correct reading, repeat the measurement until
you get at least 2 of the same readings within 3 attempts.
For successful measuring results, consider the following
conditions:
- The measured object surface must be flat and hard.
- Distance measuring through glass is not possible.
- When the distance is out of the work range, the tool
will beep and register an error.
Low battery indicator (fig. D)
The LCD screen will display a low battery symbol (21) when
the battery is nearly empty.
Replace the battery on time.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDM100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info