581331

Black Decker BDLB28 T1 Manual

4
Zoom out
Zoom in
Previous page
1/56
Next page
4
ENGLISH
battery(s). Inserting batteries into
power tools and appliances that have
the switch on invites accidents.
X Under abusive conditions, liquid
may be ejected from the battery,
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
X Carefully follow all instructions and
warnings on the battery label and
package.
X Always insert batteries correctly with
regard to polarity (+ and -), marked on
the battery and the equipment.
X Do not short battery terminals.
X Do not charge batteries.
X Do not mix old and new batteries.
Replace all of them at the same time
with new batteries of the same brand
and type.
X Keep batteries out of the reach of
children.
X Remove batteries if the device will not
be used for several months.
X Never attempt to open for any reason.
X Do not store in locations where the
temperature may exceed 40 °C.
X When disposing of batteries, follow the
instructions given in the section
"Protecting the environment".
X Do not incinerate the batteries.
Features
This appliance includes some or all of the
following features:
1. Hook
2. LED light bar
3. On/off/ button (BDLB14)
4. Battery compartment
5. On/off button (BDLB28)
Assembly
Installing the batteries (fig. A)
Warning! Use AA size batteries only. Use
alkaline batteries only.
X Turn the light bar upside down to get
access to the battery compartment
cover (4).
X Unscrew the battery compartment
cover (4) anti-clockwise and remove it.
X Insert three new alkaline AA batteries
(5), make sure to match the (+) positive
and the (-) negative terminals correctly.
X Locate the cover (4) into the base of
the light bar. It will only fit one way, do
not force it.
X Screw the cover (4) of the battery
compartment clockwise to lock it into
position.
Use
Using the hook (fig. B and C)
X The hook (1) may be used to store or
suspend the light bar. The hook rotates
so that the light bar (2) can be set to
any position. Make sure that the hook
is secure around the supporting object.
Operating the 360 light bar (BDLB28)
(fig. B)
X Press the on/off button (3) once for
torch (focused beam).
X Press the on/off button (3) again to
illuminate area light.
X Press the on/off button (3) again to
illuminate the lantern.
X To turn the unit off, press the on/off
button (3) again.
Operating the mini light bar (BDLB14)
(fig. C)
X Press the on/off button (5) once to
illuminate six of the LED's.
X Press the on/off button (5) again to
illuminate all of the LED's.
X To turn the unit off, press the on/off
button (5) again.
Maintenance
Your Black & Decker tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation
depends upon proper tool care and
regular cleaning.
Warning! Before performing any
maintenance or cleaning of the tool, unplug
the unit from the power supply.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDLB28 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDLB28 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDLB28 T1

Black Decker BDLB28 T1 User Manual - Polish - 12 pages

Black Decker BDLB28 T1 User Manual - Turkish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info