578002

Black Decker BDL120 T1 Manual

5
Zoom out
Zoom in
Previous page
1/44
Next page
5
ENGLISH
◆ Do not set up the tool at a position where the laser beam
can cross any person at head height.
◆ Do not let children come near the laser.
Features
1. On/off switch
2. Levels
3. Laser aperture
4. Battery cover
Assembly
Warning! Make sure that the tool is switched off.
Fitting the batteries (fig. A)
◆ Remove the battery cover (4) from the tool.
◆ Insert the batteries into the tool in the orientation as
shown.
◆ Refit the cover and let it click into place.
Wall mounting (fig. B & C)
The tool can be mounted to walls using one of the wall
mounts (5 or 6). The wall pin (5) is used to hang the tool to
drywalls. The keyhole mount (6) is used to hang the tool on
other types of wall using a screw or nail.
Warning! Keep the wall mounts in a safe place when not in use.
Wall pin
◆ Fold out the spade pin (7).
◆ Hold the wall pin in front of a suitable location and press
the pin straight into the wall.
◆ Install the tool by clinging the magnet (8) to the wall pin (5).
Warning! The wall pin is sharp and should be handled with care.
Keyhole mount
◆ Drive a screw or nail into the wall.
◆ Hang the wall mount (6) onto the fastener.
◆ Install the tool by clinging the magnet (8) to the keyhole
mount (6).
Use (fig. D)
◆ Place the tool flat against the wall as shown.
◆ Push the on/off switch (1) up to switch the tool on.
◆ Move the tool as necessary to position the laser line.
◆ Hang the tool on the wall using the appropriate wall mount.
Adjusting the laser line (fig. E)
◆ In order to project a vertical line, adjust the tool until the
vial (9) is level.
◆ In order to project a horizontal line, adjust the tool until
the vial (10) is level.
Using the scale
The scale (11) on the wall mount can be used for angular
adjustment.
◆ Align the 0° position on the scale with the pointer on the
tool by turning the wall pin.
◆ To check an angle, adjust the scale as necessary.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair agent
by contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised Black &
Decker repair agents and full details of our after-sales service and
contacts are available on the Internet at: www.2helpU.com
Batteries
At the end of their useful life, discard batteries with
due care for our environment.
◆ Remove the batteries as described above.
◆ Place the batteries in a suitable packaging to ensure that
the terminals cannot be short-circuited.
◆ Take the batteries to a local recycling station.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDL120 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDL120 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDL120 T1

Black Decker BDL120 T1 User Manual - Polish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info