709470
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
ENGLISH
(Original instructions)
11
ENGLISH
(Original instructions)
u Remove hand from guard lever and firmly grip secondary
handle (7), as shown in gure N. Position your body and
arm to allow you to resist kickback if it occurs.
u Make sure blade is not in contact with cutting surface
before starting saw.
u Start the motor, allow saw to come to full speed, and then
gradually lower the saw until its shoe rests at on the
material to be cut. Advance saw along the cutting line until
cut is completed as shown in gure K.
u Release trigger and allow blade to stop completely before
withdrawing the blade from the material.
u When starting each new cut, repeat as above.
Troubleshooting
Problem Possible Cause Possible Solution
Unit will not start.
Battery pack not
installed properly.
Battery pack not
charged.
Check battery pack
installation.
Check battery pack
charging requirements.
Battery pack will
not charge.
Battery pack not
inserted into charger.
Charger not plugged in.
Surrounding air
temperature too hot or
too cold.
Insert battery pack into
charger until LED appears.
Plug charger into a
working outlet. Refer
to “Important Charging
Notes” for more details.
Move charger and battery
to a surrounding air
teperature of above 40
degrees F (4.5°C) or
below 105 degrees F
(+40.5°C).
Unit shuts off
abruptly.
Battery pack has
reached its. maximum
thermal limit.
Out of charge. ( To
maximize the life of the
battery pack it is
designed to shutoff
abruptly when the
charge is depleted.)
Allow battery pack to cool
down.
Place on charger and
allow to charge.
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
u Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER ofce at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDCCS18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDCCS18 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info