Manual Black Decker BDBBC2C T1 (page 3 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

581308

Zoom out

Zoom in

1/48

ENGLISH

X Follow these instructions and those published by the

battery manufacturer, vehicle manufacturer and

manufacturer of any equipment you intend to use with

this unit. Review warning labels on these products and

on the vehicle.

X This appliance is not designed to be used as a

replacement for a vehicular battery. Do not attempt to

operate a vehicle that does not have a battery installed.

X The appliance must only be connected to a 12 V lead-

acid battery. Do not use the appliance for charging dry-

cell batteries that are commonly used with home

appliances. These batteries may burst and cause injury

to persons and damage property.

Warning! Explosive gas may be vented from the lead-acid

batteries when charging and under extreme conditions

battery leakage may occur. Make sure that the area is well

ventilated when conducting jump starting and charging

procedures.

The following symbols are marked on the appliance:

Features

1. Power LED indicator

2. Boosting LED indicator

3. Plug storage

4. Cord storage

5. 12 Vdc accessory plugs

6. Housing

Use

Warning! Make sure that the car is in neutral and the parking

brake is applied.

Step 1

X Connect the black 12 Vdc accessory plug (5) into the

12 V outlet on the working vehicle and make sure that

the power LED (1) lights.

X Start the engine on the working vehicle.

Step 2

Warning! Make sure that car is in neutral and the parking

brake is applied.

X Fully unwind the cord from the cord storage (4) and

connect the orange 12 Vdc accessory plug (5) into the

12 V outlet on the dead vehicle and make sure that the

boosting LED (2) lights.

Step 3

X When the dead car is sufficiently boosted to start the

engine both the power LED (1) and the boosting LED (2)

will change colour to green (approx. 20 minutes).

X Remove the orange 12 Vdc accessory plug (5) from the

dead car and try starting the vehicle in 3-5 second

bursts.

Note: The housing (6) and the 12 Vdc accessory plugs (5)

will become warm during the boosting process. This is

normal.

Step 4

X Remove the black 12 Vdc accessory plug (5) from the

working car and coil the cable around the cord storage

(4) and fit the 12 Vdc accessory plugs (5) into the plug

storage apertures (3).

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

care and regular cleaning.

Warning! Before performing any maintenance or cleaning

on the appliance, unplug the appliance.

X From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner. Do

not immerse the appliance in water.

X Clean the outside case with a soft cloth and, if

necessary, mild soap solution.

X Do not allow liquid to enter the unit. Do not operate

when the unit is wet.

X Keep the cords coiled during storage to prevent damage

to the cords.

Troubleshooting

If the power and boosting LED’s (1 & 2) do not light up check

the following:

X Check that the donor vehicles 12 V accessory socket is

live, some cars require the key to be in the accessory

position before the socket is live.

X Check that the 12 Vdc accessory plugs (5) are fully

inserted.

X Check for blown fuses in the 12 Vdc accessory

plugs (5).

If your car fails to start:

X Repeat steps 2-4 in the ‘use’ section and continue the

boosting process for a further 10 minutes or until the

LED’s change to green.

X If your car still fails to start we suggest you have your

battery checked by a qualified auto-electrician.

Power LED indicator.

Boosting LED indicator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDBBC2C T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BDBBC2C T1 Manual

Product: