581284
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
When the item is deflated or to stop the pump at any
time press the power switch (22) on the LCD.
Remove the high-volume hose ((7) from the item and
store it in the storage channel around the centre of the
unit.
Turn the main power switch (1) to the off
position (b fig. E).
Operating the LED light
To switch on the LED light (12):
Switch the main power switch (1) to the inflate (c fig. E)
or the pump (a fig. E) position.
Press either of the - or + buttons (21, 23) on the LCD (2)
to turn the LED light (12) on.
To switch the LED light (12) off:
Press either of the - or + buttons (21, 23) again.
Turn the main power (1) switch to off.
Sleep mode to preserve battery life
The unit is fitted with a sleep mode function that will help
prolong the life of the internal battery.
If the unit is left on and unused for more than two minutes the
unit will switch into sleep mode.
To power the unit again either switch the main power
switch (1) on and off or press any button on the LCD (2).
Note: After sleep mode, all settings will be lost and will need
to be re-entered following the instructions under the heading
'Setting the required pressure'.
Maintenance
Your Black & Decker corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper appliance/tool care and regular
cleaning.
Warning! Before performing any maintenance on corded/
cordless appliance/tool:
Switch off an unplug the appliance/tool.
Or switch off and remove the battery form the appliance/
tool if the appliance/tool has a separate battery pack.
Unplug the charger before cleaning it. Your charger
does not require any maintenance apart from regular
cleaning.
Regularly clean the ventilation slots in your appliance/
tool/charger using a soft brush or dry cloth.
Regularly clean the housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Troubleshooting
Replacing the fuse in the vehicle dc accessory plug
Remove the cap by turning it counter-clockwise.
Remove the cap and centre pin.
Remove the fuse.
Fit a new fuse of the same type and size (8A/250V).
Refit the cap and centre pin.
Tighten the cap by turning clockwise onto the plug.
Protecting the environment
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Problem Possible cause Possible solution
Inflator will not
operate.
Internal battery
fault.
Recharge the
battery.
12 Vdc adapter not
connected.
Connect the 12 Vdc
adapter.
Accessory socket
not live.
Turn key to
accessory position
Main ON/OFF
switch not in
correct position.
Turn main switch to
required position.
No preset value
set.
Set preset value.
The fuse in the
12 Vdc adapter is
blown.
Replace the fuse with
one of the same size
and type (8A/250V).
Cord or switch is
damaged.
Have the cord or
switch replaced at a
Black & Decker
Service Centre or
Authorised Service
Centre.
Will not inflate. Incorrect mode
selected.
Select correct mode.
LCD not
illuminated.
Unit in sleep
mode.
Press any button on
LCD or the main on/
off switch.
Separate collection. This product must not be
disposed of with normal household waste.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ASI500 TH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ASI500 TH1 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker ASI500 TH1

Black Decker ASI500 TH1 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish - 88 pages

Black Decker ASI500 TH1 User Manual - Turkish - 12 pages

Black Decker ASI500 TH1 User Manual - Spanish, Norwegian, Finnish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info