621988

Bissell Steam Mop Select 23V8-EFGY SERIES Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
www.bissell.com
Operations
8
Before you clean
Thoroughly sweep or vacuum floor
prior to cleaning with the Steam
Mop Select.
Cleaning hard floors
Your Steam Mop Select is designed
to clean hard flooring such as
ceramic tile, vinyl, laminate, marble,
stone and sealed hard wood floors.
Use of your Steam Mop Select on
waxed or some unwaxed floors may
result in a diminished glossiness.
The Steam Mop Select is not for use
on unsealed wood floors. For best
results test in an inconspicuous area
and check the care instructions from
your flooring manufacturer.
1. Plug the unit in and wait 30 seconds for
it to heat up. Begin cleaning by slowly
passing over surface while pressing the
steam on demand trigger to emit steam
as needed.
2. To sanitize an area of your floor, (attack
invisible germs and bacteria) place the
Steam Mop Select over the spot for a
minimum of 15 seconds using continuous
steam, but no longer than 20 seconds
using continuous steam. For larger
areas, overlap swivel head placement.
Important: Sanitizing on timber floors
is not recommended as prolonged
application of steam in one area
increases the risk of damage to the
surface treatment on timber floors,
especially in areas with regular
foot traffic and direct sunlight,
which will wear down timber floor
surface treatments making it more
susceptible to steam damage. See
CAUTION to the right.
3. When the Steam Mop Select stops
emitting steam, unplug the unit. Simply
remove the water tank, refill, and
continue cleaning.
WARNING:
Never put descaling, alcoholic,
or detergent products into the
steam cleaner, as this may
damage it or make it unsafe for
use. Only use BISSELL authorized
aromatic products.
CAUTION:
Exercise extreme care when using
the Steam Mop Select on timber
flooring. Ensure the Steam Mop
Select an inconspicuous area
prior to mopping a large floor
area. The Steam Mop Select
generates hot steam, so when
depressing the trigger to apply
steam, ensure the Steam Mop
Select is moving continuously.
The trigger does not need to be
depressed at all times. Prolonged
application of steam in one area
increases the risk of damage to
the surface treatment on timber
floors. Check with your timber
floor treatment application
specialist prior to Steam Mop
Select operation. Regular foot
traffic and direct sunlight will
wear down timber floor surface
treatment making it more
susceptible to steam damage.
Exercise extreme care when
using the Steam Mop Select on
timber flooring.
EN
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Steam Mop Select 23V8-EFGY SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Steam Mop Select 23V8-EFGY SERIES in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Steam Mop Select 23V8-EFGY SERIES

Bissell Steam Mop Select 23V8-EFGY SERIES User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info