Manual Bissell Powerwash Deluxe 3278 (page 9 of 11) (English)

621997

Zoom out

Zoom in

1/11

Care & Storage

D1 – Machine care

For best results, a few simple steps can

assure your machine is well maintained after

cleaning is complete.

1. Flush your machine of any remaining

residual solution.

a. Fill 2-in-1 water tank with clean hand

hot (60°C/140°F MAX) tap water.

b. Recline handle and press spray trigger

for 15 seconds while making forward and

backward passes on the carpet. Release

spray trigger and make forward and

backward passes for another 15 seconds

or until there is no more water being

suctioned up from carpet.

2. Press power pedal

off. Unplug machine

and wrap power cord.

3. After emptying 2-in-1 water tank, rinse it

with running hand hot (60°C/140°F MAX) tap

water, taking care to clean underneath and

around heavy duty bladder. Clean out red lint

screen prior to replacing tank. Removable

nozzle may be rinsed if necessary.

4. Replace 2-in-1 water tank on machine.

5. Any loose hair or debris can be pulled

from brush roll and thrown away. See page

9 for instructions on removing brush roll.

6. Clean the ReadyTools dial assembly area

by following instructions in Step 11-13 in

section C6.

7. To clean attachments, remove from hose

and rinse under clean, running water. Dry

before storing. Clean hose by suctioning

clean water from tap (taking care not to let

tank overflow). Before wrapping back on

machine, lift end of hose and stretch out to

ensure all water is cleared from hose. Refer

to page 3, section C6, illustrations 7 and 8.

8. Wipe machine’s exterior with a soft cloth.

9. After carpet is dry, you may wish to

vacuum again to remove any leftover hair

and fuzz the deep cleaner may have brought

to the carpet surface.

D2 – Machine storage

Put unit away in a closet or basement for next

use. Store cleaner in a protected, dry area.

Since this product uses water, it must not be

stored where there is a danger of freezing.

Freezing will damage internal components

and void guarantee.

D3 – Brush belt and brush

removal & replacement

Occasional replacement of the brush belt

or brush may become necessary. If needed,

please follow instructions below.

1. Turn off machine and unplug it from outlet.

Wrap hose and cord on racks.

2. Remove 2-in-1 water tank and set aside.

3. IMPORTANT: Fully recline handle and

turn unit upside down.

4. Locate red belt access door and remove

two screws.

NOTE: The dark screw is a long machine

screw and will take approximately 25 full

turns to completely remove. The head of

the screw will lift from the belt access door

so that it can be easily removed.

5. Remove belt access door assembly from

end of brush and set aside.

6. Remove brush belt. If worn or damaged,

replace with new brush belt.

7. If necessary, the brush roll can be removed

for cleaning or replacement. To remove,

rotate the brush out of brush housing and

pull brush off axle attached to remaining end

cap. The remaining pivot arm can be removed

by removing the screw (this will allow for

full access to brush chamber for cleaning).

Make sure “keyed” end of metal rod is aligned

with slot in pivot arm before re-assembling.

Replace brush on axle, cogged-side, last. You

may need to rotate brush to allow it to slide

all the way down the axle.

8. Reattach brush belt by installing onto

toothed pump pulley and then onto toothed

end of brush.

9. Reattach belt access door assembly

to end of brush and rotate back into place.

Replace screws.

NOTE: Do not over tighten screws.

If you have any questions or are having

trouble removing, replacing or reinstalling

your brush belt or brush, please contact

BISSELL.

www.BISSELL.com

To reduce the risk of electric shock, push power

button

o and disconnect plug from

electrical outlet before performing maintenance

or troubleshooting checks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Powerwash Deluxe 3278 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Powerwash Deluxe 3278

Bissell Powerwash Deluxe 3278 User Manual - German - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell Powerwash Deluxe 3278 Manual

Product: