Manual Bissell Hydro Clean Pro Heat Complete 1474J (page 9 of 11) (English)

669273

Zoom out

Zoom in

1/11

C-4 Upholstery Cleaning

1. Important! If using to wet clean

upholstery, check the upholstery tags

before hand.

a. Check manufacturer’s tag before

cleaning. “W” or “WS” on the tag means

you can use your cleaner. If the tag

is coded with an “X” or an “S” (with a

diagonal stripe through it), or says “Dry

Clean Only”, do not proceed with wet

cleaning. Do not use on velvet or silk.

If manufacturer’s tag is missing or not

coded, check with the furniture maker

or the furniture dealer.

b. Check for colourfastness in an

inconspicuous place.

c. If possible, check upholstery stuffing.

Coloured stuffing may bleed through

fabric when wet.

d. Plan activities to allow upholstery

time to dry.

e. Vacuum thoroughly.

2. Refer to the “Getting Ready to Wet

Clean”, section C-2.

3. Attach desired wet cleaning tool

directly to grip.

4. Place tool directly on surface. Press spray

trigger to spray cleaning solution while

pulling tool towards you.

5. Keep nozzle of tool firmly against surface

and continue to make slow forward and

backward wet passes until no more dirt can

be removed. Caution: Do not overwet.

6. Release spray trigger and make slow

forward and backward passes over same

area to remove any residual water.

7. Continue to clean entire surface.

8. If machine loses suction, stop wet

cleaning and check collection tank level.

Empty if full.

9. If machine stops spraying, turn off

wet clean button immediately and check

solution tank level. Refill if empty.

10. Refer to section D for machine

care instructions.

C-5 Hard Floor Cleaning

1. Open Quick Release hose door, turn

cleaning mode selector to “WET CLEAN”,

then close hose door.

2. Remove tool caddy from back of

cleaner if in place.

3. Unscrew measuring cap from solution

tank. Fill solution tank with hand hot tap

water to fill line. Add one full measuring cap

of BISSELL hard floor cleaning formula then

screw cap tightly back onto solution tank.

IMPORTANT: Be sure to use BISSELL hard

floor cleaning formula when cleaning

sealed hard floor surfaces.

4. Place solution tank back in the cleaner.

5. Attach Microfibre mop pad to quick dry

hard floor tool by attaching ends to Velcro

strips on top of tool.

NOTE: Be sure top of mop pad is posi-

tioned below brushes on hard floor tool.

6. Attach quick dry hard floor tool to end

of the wand.

7. Plug into a proper electrical socket and

push power and wet clean buttons on.

8. Place tool directly on the hard floor

surface, resting on the pad.

9. Press spray trigger to moisten mop pad

with cleaning solution.

Caution: Do not oversaturate.

10. Move tool back and forth across floor;

using solution, brushes and mop pad to

clean. Press spray trigger as needed.

11. With spray trigger released, swivel tool

forward and pull back across cleaned floor

to remove any residual water. This will create

the best suction and will help get the hard

floor surface as dry as possible.

12. Continue to clean entire floor.

13. If cleaner loses suction, stop wet cleaning

and check collection tank level. Empty if full.

14. If cleaner stops spraying, turn off wet

clean button immediately and check

solution tank level. Refill if empty.

15. When finished, be sure to remove

Microfibre mop pad and clean by hand

or machine wash as needed. Allow to

dry completely before next use.

16. Refer to section D for machine

care instructions.

www.BISSELL.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Hydro Clean Pro Heat Complete 1474J in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell Hydro Clean Pro Heat Complete 1474J

Bissell Hydro Clean Pro Heat Complete 1474J User Manual - English, German, Dutch, French, Italian, Polish, Swedish, Spanish - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell Hydro Clean Pro Heat Complete 1474J Manual

Product: