Briefly press the button on the right side of the console. The battery
will beep 4 times, this is the system performing a self check. After
startup, the system is always in normal bike mode (no motor assist).
To turn the system off:
Briefly push the right side button again and the battery will beep 5
times. The system turns off automatically after 5 minutes of inactivity.
Backlight / lighting system (if applicable):
Press and hold the right side button for five seconds, the light indicator
will appear on screen. This activates the front light, rear light, and the
console backlight. The lights will remain lit even when the bicycle is not
in motion. Press and hold again for 5 seconds to turn the lights off.
Assistance level selection:
The assistance toggle is located on the front of the console. Press the
right side (+) of this button to add more proportional assist, press the left
side (-) to reduce the assist level. Note the bars to the left of the bicycle
graphic indicating assistance levels 1 through 4.
Generate mode:
The generate feature for this system is activated whenever the rear
brake lever is pulled. The top two bars on the console will blink, you will
feel resistance on the rear wheel, and the battery will regain lost energy.
Installing / removing the console:
To install the console, place it on the dock and slide it
gently to the left until a click is heard.
To remove the console, push the console to the right
gently until it pops free of the clamp, and continue to
slide until it can be lifted.
WARNING: Never plug or unplug any connection with the
system turned on - this includes the console.
Easy V2 Console #01-3850
1. Speed indicator (service: blinking)
2. Assist and generate level indicator
3. Power on / off (hold for light on / off)
4. Light indicator
5. Assistance +
6. State-of-charge indicator
7. Assistance -
8. Trip / total distance indicator
2
1
8
4
57
3
Assistance level selection:
The assistance toggle is located on the front of the console. Press the right side
(+) of this button to add more proportional assist, press the left side (-) to
reduce the assist level. Note the bars in the top right corner of the screen
indicating assistance levels 1 through 4.
Generate mode:
The generate feature for this system is activated when the rear brake lever is
pulled AND by manually selecting a resistance level. Press the left side of the
assistance toggle until the numbers in the top right corner flash - you will feel
resistance on the rear wheel and the battery will gain energy during this time.
Trip / total distance toggle:
Press and hold the left (-) button for 5 seconds to switch between trip / total
distance. The trip distance can be reset by pressing the (+) button for 5 seconds.
Installing / removing the console:
To install the console, place it on the dock and slide it
gently to the left until a click is heard.
To remove the console, push the console to the right
gently until it pops free of the clamp, and continue to
slide until it can be lifted.
WARNING: Never plug or unplug any connection with the
system turned on - this includes the console.
KM/h
KM
TRIP
6
KM/h
KM
TRIP
KM/h
KM
TRIP
Turning on the system:
Briefly press the button on the right side of the console. The battery
will beep 4 times, this is the system performing a self check. After
startup, the system is always in normal bike mode (no motor assist).
To turn the system off:
Briefly push the right side button again and the battery will beep 5
times. The system turns off automatically after 5 minutes of inactivity.
Backlight / lighting system (if applicable):
Press and hold the right side button for five seconds, the light indicator
will appear on screen. This activates the front light, rear light, and the
console backlight. The lights will remain lit even when the bicycle is not
in motion. Press and hold again for 5 seconds to turn the lights off.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for BionX Easy V2 Console 01-3850 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of BionX Easy V2 Console 01-3850 in the language / languages: English as an attachment in your email.
The manual is 0,88 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
