661280
10
Zoom out
Zoom in
Previous page
1/12
Next page
3) Relax your hand and keep palm facing up.
4) Press the "START" button, all icons appear two
seconds on display, then flashing of “U1” or “U2”.
5) Press “MEMO” button to select the user of memory
location within 3 seconds while it is flashing.
6) Device will automatic start measurement within a few
seconds. The pressure in the cuff will automatically
inflate. When the value on LCD increase to around
150~200mmHg, and start to deflation until measurement
completed, and display results on LCD.
7) After measurement the screen will display systolic,
diastolic, and pulse/min value. Meanwhile, it will auto.
Store the measured results into user's memory.
Level indicator-
One bar for Systolic below 99 mmHg
Two bars for Systolic between 100 ~ 139 mmHg
Three Bars for Systolic between 140 ~ 159 mmHg
Four bars for Systolic above 160 mmHg
Irregular Heartbeat Detection(IHD)-
During measurement, if the sensor detects
more than twice of Heartbeat out of 25%
tolerance to your average Heart rate, the
display will turn on Irregular Heartbeat icon .
8) Press "START" button to turn off the unit.
Note:
* The value measured will be too low if you hold your hand
higher than your heart lever or too high if you hold your
hand lower than your heart lever.
* Do not bend your wrist inward.
* The unit may store up to 50 measurements per user, if more
than 50 records, it will only store latest 50 memories. (Total
100 memories for 2 users)
* During measurement avoid speaking and body/hand shaking
which may affect the accuracy of record.
* During measurement process, If you want to stop, just press
the power button to stop.
1. Press "MEMO” button, display with “U1” or “U2” flashing,
press “Memo” button again while it is flashing to select
user U1 or U2 , you are going to review.
RECALLING MEMORY
-17- -18-
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bioland 3006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bioland 3006 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info