496756
5
Zoom out
Zoom in
Previous page
1/10
Next page
Binatone Help Line - 0845 345 9677
Your Action 950 can alert you to incoming signal by
naudiblecalltonesignal.
Each channel also has 83 digital codes to let you set up
a group of users for more secured private communication.
a. Press the MENU button 3 times. The current DCS code
flashes on the LCD screen.
b. Press the UP or DOWN button to select the desired DCS
code.
c. Press the PTT button to confirm the DCS channel setting.
3.3.2 Setting the DCS Advanced Digital Code
Transmitting and Receiving
The Action 950 transmission is “one way-at-a-time.” While
you are speaking, you can not receive a transmission.
The Action 950 is an open-license band. Always identify
yourself when transmitting on the same channel.
The unit is continuously in the Receive mode when the unit is turned
ON and not transmitting. When a signal is received on the current
channel, the “RX” icon will be displayed on the LCD Screen and
the receiver LED lights up.
a. Press and hold the PTT (push to talk) button to transmit
your voice. the “TX" icon will be displayed on the
LCD Screen and transmit LED lights up.
b. Hold the unit in a vertical position with the MIC
(Microphone) 5 cm away from the mouth. While holding
the PTT button, speak into the MIC (microphone) in a
normal tone of voice.
c. Release the PTT button when you have finished
transmitting.
3.5 Transmitting(sending speech)
3.6 Monitor
a. Press and hold the MENU and DOWN buttons at the
same time. The “RX” icon will be displayed on the
Action 950 w ill pick up signals on
b. Press the MENU button to stop the channel monitoring.
In VOX mode, the Action 950 will transmit a signal only when it
r sounds around you. The unit
will transmit for a further 2 second after you stop talking.
The level of VOX sensitivity is shown by a number on the LCD
Screen. At the highest level, the unit will pickup softer noises
(including background noise); at the lowest level, it will pick up
only quite loud noises.
3.7 Setting the VOX(Voice Activated)Sensitivity
a. Press the MENU button 4 times, the“VOX” icon will
be displayed and “OFF” flashes on the LCD Screen.
b. Press the UP button to set the VOX sensitivity to
the required level (the maximum level is“ 3 ”.) To deactivate
the VOX function, press the DOWN button until “OFF”
appears on the LCD Screen.
c. Press the PTT button to confirm your setting. “VOX” will
steadily appear on the LCD Screen as long as the VOX
feature is activated.
VOX operation is not recommended if the Action 950 will be used in
is activated by your voice or othe
a noisy or windy environment.
3.4 Receiving
(Note: Monitor will not work in Dual Watch Mode.)
LCD Screen, and your
the current channel, including background noise.
emitting a
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Binatone Action 950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Binatone Action 950 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info