Manual Bifinett KH 2230 (page 9 of 19) (English)

8833

Zoom out

Zoom in

1/19

8 Wheat Wheat

9 Wheat Sweet

10 Sweet Sweet

7. Press the COLOUR button to choose the crust colour. When you press the button you will hear a

beep and the display window will show the colour you selected. Alternatively, you can also select

the Express mode with this button.

Note

: At this point, you can press the TIMER button to delay the completing of the baking process

for up to 13 hours For further details see Using the Timer.

8. Press the START/STOP button to start the chosen setting. The remaining time will count down in

one-minute intervals. At the end of the baking time a beep will sound ﬁ ve times.

Bread-making Tip: After 5 minutes of kneading, open the lid of the unit and check the dough

consistency. The dough should form a soft, sticky ball. If it is too dry, add liquid. If it is too wet,

add ﬂ our (1/2 to 1 tablespoon at a time).

9. The bread machine is designed with a Keep Warm feature, which automatically begins functioning

as soon as the baking time has ended. This will continue for up to 60 minutes after the end of

the baking process. During this time, the system will circulate hot air to keep the bread warm. You

can turn off the Keep Warm feature before the end of the 60 minutes. Simply press the START/STOP

button and keep it pressed until you hear a beep. UNPLUG THE UNIT AFTER ITS USE! Never leave the

unit plugged in when not in use.

10. The bread machine has a convenient viewing window so that you may observe the progress of the

bread as the bread-making process goes through its stages. Occasionally, some moisture may form

on the window during the bread-making process. You may open the lid to look into the unit during

the mixing and kneading stages. HOWEVER, DO NOT OPEN THE LID DURING THE BAKING CYCLE, as

this may cause the bread to collapse.

Warning

: To avoid damaging the bread machine, do not put any objects upon it.

11. To remove the baking tins from the unit, use pot holders or oven gloves and pull the tins

upwards. Turn the tins upside down and shake the bread out onto a wire cooling rack. Do not use

any metal utensil to remove the bread, as they may scratch the non-stick surface. If you have

difﬁ culty removing the bread from the baking tin, use a plastic spatula or something similar to

loosen the loaf. Turn the tin over and shake the loaf out.

Before slicing the bread, allow it to cool off. See Slicing and Storing Bread. If the kneading blade

sticks to the shafts at the bottom of the baking tin, put hot water into the tin for the kneading

blade to loosen. If the kneading blade remains in the bottom of the bread, use the end of a plastic

spoon or other non-metal utensil to remove it. Do not use a knife or any other sharp metal object

as it will scratch the non-stick coating.

Attention

: Before slicing the bread, always make sure that the kneading blade is removed from the loaf.

Important

: To prevent the blade from sticking to the shaft, put warm water into the tin

immediately after removing the bread.

12. In case of overheating of the unit, the DISPLAY WINDOW will show „E 01“, if the temperature is too

low, „E 00“ will show up. When either of these error messages is displayed, the bread machine will

not function until it has either cooled off or warmed up.

Caution

: Do not try to make another loaf until the bread machine has cooled down or warmed up.

Wieviel Mehl und Wasseer füllt ma jeweils in die eine BAckform ; (von Zwei) Submitted on 18-11-2020 at 13:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bifinett KH 2230 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bifinett KH 2230

Bifinett KH 2230 User Manual - German - 75 pages

Bifinett KH 2230 User Manual - German - 87 pages

Bifinett KH 2230 User Manual - Dutch, French - 75 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bifinett KH 2230 Manual

Product: