456303
18
Zoom out
Zoom in
Previous page
1/20
Next page
- 16 -
Bedienen
Hinweis
Vor der ersten Benutzung müssen Sie das Gerät
entsprechend den Anweisungen im
Reinigungskapitel gründlich reinigen.
Setzen Sie die Schüssel 6 in den Standfuß 9.
Stecken Sie den Messerhalter 5 mit dem
Messer 7 auf das Lager 8.
Bereiten Sie das Füllgut vor, indem Sie große
Stücke soweit zerkleinern, dass Sie in die Schüs-
sel 6 passen.
Geben Sie das Füllgut in die Schüssel 6. Beach-
ten Sie dabei folgende Tabelle:
Lebensmittel
Füll-
menge
Bearbei-
tungszeit
Geschwin-
digkeit
Salami 130 g 2 x 5 Sek. normal
Käse
(Gouda, jung,
kühlschrank-
temperatur)
120 g 2 x 8 Sek. turbo
Zwiebeln
Knoblauch
100 g pulsierend turbo
Karotten 100 g 3 x 5 Sek. normal
Dörrobst 130 g 2 x 8 Sek. normal
Mandeln 150 g
grob:
1 x 10 Sek.
mittel:
2 x 10 Sek.
fein:
3 x 10 Sek.
turbo
Eier
(hart gekocht)
150 g 2 x 4 Sek. turbo
Walnüsse 100 g 2 x 8 Sek. turbo
Eiswürfel 100 g pulsierend turbo
Verschließen Sie die Schüssel 6 mit dem Deckel
4: setzen Sie ihn so auf die Schüssel 6, dass
die Nasen am Deckel 4 in die Schienen an der
Schüssel 6 greifen. Drehen Sie den Deckel 4
dann so, dass die Nasen in den Schienen nach
unten gleiten und der Deckel 4 einrastet.
Setzen Sie den Motorblock 2 auf den Deckel-
Bund 3.
Drücken Sie den Motorblock 2 nach unten
,wie in der Abbildung B gezeigt. Der Mo-
tor startet mit der normalen Bearbeitungsge-
schwindigkeit.
Um eine höhere Bearbeitungsgeschwindigkeit
Turbo“ für das Füllgut zu erhalten, drücken Sie
zusätzlich zum Motorblock 2 die Turbo-Taste
1 und halten Sie diese gedrückt, wie in der Ab-
bildung C gezeigt.
Hinweis
Sollten sich während der Bearbeitung größere
Stücke des Füllguts an der Schüsselwand
ansammeln, heben Sie den Motorblock 2 vom
Deckel-Bund 3 ab. Schütteln Sie die Schüssel 6
kräftig durch und beginnen Sie anschließend mit
der Bearbeitung von vorne. Eventuelle Rückstände
mit einem Teigschaber entfernen.
Bei besonders harten Lebensmitteln, wie z.B.
Blockschokolade, empfiehlt es sich eine pulsierende
Bearbeitung zu wählen. Drücken Sie hierzu mehr-
fach kurzzeitig die Turbo-Taste 1 (zusätzlich zum
Motorblock 2). Sollte das Füllgut nicht vollständig
zerkleinert werden, können Sie es entweder in
kleinere Stücke schneiden oder heben Sie den
Motorblock 2 vom Deckel-Bund 3 ab. Schütteln
Sie die Schüssel 6 kräftig durch und beginnen Sie
anschließend mit der Bearbeitung von vorne.
Wenn das Füllgut zerkleinert worden ist, lassen
Sie Motorblock 2 und gegebenenfalls die
Turbo-Taste 1 los.
Ziehen Sie den Netzstecker.
IB_KH1160_E40531_LB2 22.09.2008 9:01 Uhr Seite 16
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bifinet KH 1160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bifinet KH 1160 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info