Manual Beurer IH 20 (page 71 of 72) (English, German, French, Italian, Polish, Turkish, Spanish)

568810

Zoom out

Zoom in

1/72

Guidance and manufacturer’s declaration – electromagnetic immunity

The IH20 is intended for use in the electromagnetic environment specified below. The customer or the user

of the IH20 should assure that it is used in such an environment.

Immunity test EN 60601

test level

Compliance

level

Electromagnetic environment – guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to

80 MHz

3 V/m

80 MHz to

2.5 GHz

3 Vrms

3 V/m

Portable and mobile RF communications

equipment should be used no closer to any

part of the IH20, including cables, than the

recommended separation distance calculated

from the equation applicable to the frequency

of the transmitter. Recommended separation

distance

d = 1,2 P

d = 1,2 P 80 MHz to 800 MHz

d = 2,3 P 800 MHz to 2,5 GHz

where P is the maximum output power rating

of the transmitter in watts (W) according to the

transmitter manufacturer and d is the recom-

mended separation Distance in metres (m).

Field strengths from fixed RF transmitters, as

determined by an electromagnetic site survey,

should be less than the compliance level

in each frequency range.

Interference may

occur in the vicinity of equipment

marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land

mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically

with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site

survey should be considered. If the measured field strength in the location in which the IH20 is used exceeds

the applicable RF compliance level above, the IH20 should be observed to verify normal operation. If abnormal

performance is observed, additional measures may be necessary, such as re-orienting or relocating the IH20.

Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IH 20 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer IH 20

Beurer IH 20 User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer IH 20 Manual

Product: