470367
13
Zoom out
Zoom in
Previous page
1/64
Next page
13
Confirm your selection with the function key „+“.
5. Measuring blood pressure
Positioning cuff
Bare your left wrist, making sure that the circulation in the
arm is not restricted by any clothes etc. that are too tight.
Position the cuff on the inside of your wrist.
Fasten the cuff with the Velcro fastening so that the upper
edge of the monitor is positioned approx. 1 cm below the
ball of your thumb.
•Thecuffhastobefittedtightlyaroundthewrist
but should not constrict it.
Correct posture
Rest for approx. 5 minutes before
each measurement. Otherwise there
may be divergences.
You can perform the measurement
either sitting or lying down. It is es-
sential to support your arm and have
it at an angle. Always make sure
that the cuff is level with your heart.
Otherwise there may be serious divergences. Relax
your arm and the palms of your hands.
In order not to distort the result, it is important to keep still
during the measurement and not talk.
Select memory
Switch on the blood pressure monitor with the „
“ button.
Select the required memory space by pressing the function
key „+“ . You have two memories (60 memory spaces each) in
order to save the test results of 2 different people separately,
or else save measurements in the morning and evening sepa-
rately.
Measuring blood pressure
Put on the cuff as described previously and assume the po-
sition in which you want to carry out the measurement.
Using the buttons „ “, select the user memory 1or 2.
Start
the measurement process by pressing button “.
After
checking the display with all digits lighting up, the monitor
will automatically inflate. Following the self-test, during which
all display elements briefly appear, the measurement begins.
During inflation the device already determines measured
values used to estimate the required inflation pressure. If this
pressure is insufficient, the device automatically inflates by
another.
Then the pressure in the cuff is slowly released and the pulse
is measured.
When the measurement has been completed, the remain ing
air pressure is released very quickly. The pulse, the systolic
and the diastolic blood pressure are displayed.
You can interrupt measurement at any time by pressing the
button „ “.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BC 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BC 32 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BC 32

Beurer BC 32 User Manual - Dutch, Portuguese, Swedish, Norwegian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info