Manual Bestway 65062 Hydro-Force (page 3 of 32) (All languages)

753200

Zoom out

Zoom in

1/32

WARNING: To avoid damage to the boat and injury to passengers, please don’t exceed the data given on the

builder’s plate.

Registration (For US/Canada customers only)

If you need to register your boat, please have the boat Hull Identification Number and model name ready and then visit

bestwaycorp.com/support to obtain your Certificate of Origin, or you can send e-mail to service@bestwaycorp.us for the

Certificate of Origin.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW OWNER WHEN YOU SELL

THE CRAFT.

REPAIR INSTRUCTIONS:

• Fully clean the area to be repaired.

• Cut the correct size from the repair patch material.

Apply only the amount of glue needed to cover the repair

site.

• Press the repair patch firmly to repair site for 30 seconds.

• Wait for 1 hour before inflation.

Storage

1. Remove the Oars from the oarlocks.

Note: Keep all accessories for future use.

2. Carefully clean the boat using a mild soap with clean water.

Note: Do not use acetone, acid, and/or alkaline solutions.

3. Use a cloth to gently dry all surfaces.

Note: Do not dry the product in direct sunlight. Also, never dry with equipment such as electric blowers. Doing so will

cause damage and shorten the boat’s life span.

4. To deflate, open the Air Valves pushing the control stem in and rotating until the valves stay open. Deflate all the hull

chambers at the same time so the air-pressure drops together. This will prevent damage form occurring to the boat’s

inner structures.

5. Next deflate the Keel.

6. Disassemble the seat and floor.

7. Fold the boat from front to back to remove additional air. You can also use a pump to drain any remaining air.

The glue is not included in the repair kit due to shipping

constraints. You can find silicone-based glue at most retail

outlets. Carefully read the warning labels and closely follow

instructions on the back of glue before attempting the

following repair steps.

Deflation

Maintenance

1: Inflate according to the PSI marked besides the valve;

2: To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being

used;

3: Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting

them away. Store it at a dry and shady place and keep it out of reach of Children.

OWNER’S MANUAL

WARNING

IMPORTANT SAFETY INSTRUCTIONS

Follow all the Safety and Operating Instructions. If you don’t

follow these instructions, it may cause the boat to overturn or

explode and result in drowning.

1. Do not exceed the maximum recommended number of persons.

Regardless of the number of persons on board, the total weight

of persons and equipment must never exceed the maximum

recommended load. Always use the seats / seating spaces

provided.

2. When loading the craft, never exceed the maximum recommended

load: Always load the craft carefully and distribute loads appropriately

to maintain design trim (approximately level). Avoid placing heavy weights high up.

NOTE: The maximum recommended load includes the weight of all persons onboard, all provisions and

personal effects, any equipment not included in the light craft mass, cargo (if any) and all consumable

liquids (water, fuel, etc.).

3. When using the boat, life saving devices such as life jackets and buoys should be pre-inspected and

used at all times.

4. Before every use, carefully inspect all boat components including air-chambers, grab ropes, oars, and

air valves, to ensure everything is in good condition and tightly secured. If you find any damage, please

stop to repair it.

5. Buckets, water scoops and air pumps should always be available in case of air leakage or if the boat

takes on water.

6. When the boat is in motion, all passengers must remain seated at all times to avoid going overboard.

Keep the boat balanced. Uneven distribution of persons or load in the boat may cause the boat to

overturn and result in drowning.

7. Use the boat near the shore and beware of natural factors such as wind, tide waters and tidal waves.

BE AWARE OF OFFSHORE WINDS AND CURRENTS.

8. If one chamber is punctured when the boat is in the water, it may be necessary to fully inflate the other

air chamber to prevent the boat from sinking.

9. Be careful when landing on the shore. Sharp and rough objects such as rocks, cement, shells, glass,

etc. may puncture the boat. To avoid damage, do not drag the boat on rough surfaces.

10. When choosing an outboard motor, refer to the technical specifications section of this manual to

determine acceptable horsepower ratings.

11. For electrical motors equipped with batteries, note that battery acid can be caustic, which can cause

damage to both skin and boat materials.

12. For motors which use fuels such as gas, oil or petrol, since fuel is a flammable substance, it should be

kept away from open flames. Further, clean the boat material immediately if fuel spatters onto the boat

surface. Be aware of the potential harmful efects of liquids such as battery acid, oil or petrol. The liquids

may damage your boat.

13. Inflate according the numbered air chamber and rated pressure of the boat, or it will cause over-inflation

and potential and boat explosion. Exceeding the data given on the capacity plate may cause the craft to

be damaged, overturn and lead to drowning.

14. If you use the tow rings to tow the boat, go slowly to avoid over-towing as damage may occur.

15. Know how to operate a boat. Check in your local area for information and/or training as needed. Inform

yourself about local regulations and dangers related to boating and/or other water activities.

SAVE THESE INSTRUCTIONS

Part No. Description QTY SPARE PART NO.

001 Boat

002

Floor board

003

Bench seat

004 Oar 1

pair

005 Air pump

006 Pressure gauge 1

007 Drain valve 1

008 Repair kit 1

Note:

- The floorboards must be assembled before inflating the hull.

NOTE: Pressure gauge is for inflation purpose only, and the value of the pressure gauge is just for reference, should

not be used as a precision instrument.

- Only use Bestway® approved inflation pumps.

- Never use motor-driven high-pressure air pumps as this may result in over-inflation.

- Under and over-inflation will result in safety hazards.

- Always check the inflation pressure before using the boat.

- Never stand on or rest objects on the boat during inflation.

- Never open the cap of air valve while the boat is in use.

- Be sure the valve is tightly closed before using the boat.

Note: When the oars are not in use, lock the oars into the Oar Clasps to avoid damage.

Outboard Motor Installation

With the boat fully inflated and in the water, attach your outboard motor onto Engine Mount at the center of the Transom.

Note:

- Ensure the motor is always fixed on the Transom.

- Read the instruction of outboard motor for correct installation and operation.

- Overpowering a boat can result in serious injury, death or boat damage. The maximum motor power to be used see

marking on the product.

#65062

010 005

004

006

008

001

002

003

007

009

Part No.

001

002

003

004

005

006

007

008

009

010

QTY

1 pair

Description

Boat

Bench seat

Oar

Pressure gauge

Air pump

Drain valve

Airdeck floor

Base board

Repair kit

Bag

SPARE PART NO.

Part No.

001

002

003

004

005

006

007

008

009

010

QTY

1 pair

Description

Boat

Bench seat

Oar

Pressure gauge

Air pump

Drain valve

Airdeck floor

Base board

Repair kit

Bag

SPARE PART NO.

#65046

001

004

005

002

003

006

007

008

#65047

004

001

008

002

006

003

005

009

#65049

002

004

005

003

006

001

009

008

007

010

Technical Specifications

65049

Item Size Recommended

working pressure Maximum load capacity Maximum motor

power

2.25 kW (3 hp)

11.2 kW (15 hp)

10'10" x 64" x 17"

3.30m x 1.62m x 44cm

9'2" x 60" x 16.5"

2.80m x 1.52m x 42cm

7'6" x 51" x 13"

2.30m x 1.30m x 33cm

258 kg (568.8 lbs.)

2 adults

640 kg (1411 lbs.)

4 adults + 1 child

3.5 psi

0.24 bar

3.5 psi

0.24 bar

65062 18.4 kW (25 hp)

12'6" x 71" x 18"

3.80m x 1.80m x 46cm

780 kg (1719.6 lbs.)

6 adults

3.5 psi

0.24 bar

65046

65047 7.5 kW (10 hp)

480 kg (1058.2 lbs.)

3 adults + 1 child

3.5 psi

0.24 bar

Floor board

pressure

5 psi

0.35 bar

5 psi

0.35 bar

5 psi

0.35 bar

5 psi

0.35 bar

303021213995_21x28.5cm(65046/65047/65049/65062)_20季说明书

Part No.

001

002

003

004

005

006

007

008

009

010

QTY

1 pair

Description

Boat

Bench seat

Oar

Pressure gauge

Air pump

Drain valve

Airdeck floor

Base board

Repair kit

Bag

SPARE PART NO.

P04763

P6889ASS16

P5H666ASS19

P5C403ASS16

P3045BASS16

F3C092ASS14

P03775

P03865

P6J718ASS18

P04283

TO THE STORE

QUESTIONS? PROBLEMS?

MISSING PARTS?

For FAQ, Manuals, Videos Or

Spare Parts, Please Visit

bestwaycorp.com/support

P04760

F3H101ASS17

P03777

P5L334ASS19

P3045BASS16

P5C403ASS16

F3C092ASS14

P6J718ASS18

P04761

P6876ASS17

P5H666ASS19

P5C403ASS16

P3045BASS16

F3C092ASS14

P03779

P03863

P6J718ASS18

P04284

P04762

P6876ASS17

P5H666ASS19

P5C403ASS16

P3045BASS16

F3C092ASS14

P03781

P03864

P6J718ASS18

P04283

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 65062 Hydro-Force in the language / languages: All languages as an attachment in your email.

The manual is 24,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestway 65062 Hydro-Force Manual

Product: