753201
3
Zoom out
Zoom in
Previous page
1/56
Next page
• Inflate the air chambers with a HAND air pump.
An inflation scale is provided with the product. Inflate the product until the printed
scale is charged up to the same level as that of the supplied scale. (refer to the
table and illustrations below)
Caution: Under and over-inflation of the boat will result in safety hazards. It is
better to check the pressure of the boat each time before use. If you use another
pressure gauge, the boat pressure should not be more than the data given on the
builder’s plate.
• Never stand on or rest objects on the boat during inflation.
• Inflate the bottom chamber and other accessories such as the seat until it is stiff
to the touch, but NOT hard.
• Extended exposure to sun can shorten the lifespan of your boat. We suggest not
leaving boats in direct sunlight for more than 1 hour after use.
SAVE THESE INSTRUCTIONS
Assembling of the boat
NEVER USE HIGH PRESSURE AIR TO INFLATE INFLATABLES. THIS CAN
DAMAGE YOUR PRODUCT AND VOID YOUR WARRANTY
Oars Installation
For 61062, 61078, 61108, 61102
Note: When the oars are not in use, lock the oars into the Oar Clasps to avoid
damage.
Note: All drawings for illustration purpose only. May not reflect actual product.
Storage
1. Remove the Oars from the oarlocks.
Note: Keep all accessories for future use.
2. Carefully clean the boat using a mild soap with clean water.
Note: Do not use acetone, acid, and/or alkaline solutions.
3. Use a cloth to gently dry all surfaces.
Note: Do not dry the product in direct sunlight. Also, never dry with equipment
such as electric blowers. Doing so will cause damage and shorten the boat’s life
span.
4. Deflate the hull chambers. Deflate all the hull chambers at the same time so the
air-pressure drops simultaneously.
This will prevent damage from occurring to the boat's inner structures. Next,
deflate the floor.
5. Fold the boat from front to back to remove additional air. You can also use a
pump to drain any remaining air.
Repair
1. If there is a small puncture, repair it according to the instructions on the repair
patch.
2. If the hole is too big to be repaired with the provided patch, purchase a Bestway
repair kit or send the boat to a speciality shop to make the repair.
Registration (For US/Canada customers only)
If you need to register your boat, please have the boat Hull Identification Number
and model name ready and then visit www.bestwaycorp.com/support to obtain
your Certificate of Origin, or you can send e-mail to
service@bestwaycorp.us for the Certificate of Origin.
PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO
THE NEW OWNER WHEN YOU SELL THE CRAFT.
mc
mc1112
1112
131415
3
Item
61078 / 61099
61062 / 61100 / 61108
61102
Product Inflated Size
1.55m x 93cm (61’’ x 37’’)
1.88m x 98cm (6’2’’ x 39’’)
2.32m x 1.15m (91’’ x 45’’)
Deflated Size
10cm
10cm
10cm
Inflated Size
Chamber 3
11.3cm
11cm
11.1cm
Inflated Size
Chamber 2
5.4cm
5.4cm
5.4cm
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 61099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 61099 in the language / languages: All languages as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info