752356
5
Zoom out
Zoom in
Previous page
1/92
Next page
Parts Reference Overview
Before assembling the Pool Heater become familiar with all parts.
REF. NO. DESCRIPTION QTY PART NO.
001
002
003
Pool Heater
Hose
Hose Clamp
1
1
2
58259ASS17
P6176
P6124
Specifications
Voltage:
Power:
Frequency:
Max. Heat Capability:
Increased Heat Rate (*):
Suitable Pool Water Volume:
Filter Pump/Sand Filter
Compatibility:
Pool Compatibility:
220-240V
2,800W at 20°C
50Hz
40°C
Approximately 0.5°C/h-1.5°C/h
depending on total water volume
400-4,500gal (1,520-17,035 L)
3,785 L/h (1,000 gal/h) and below
3,785 L/h (1,000 gal/h)
15’ and smaller
NOTE: The increased Heat Rate is just for reference. The actual
heating time may vary according to the pool’s water volume,
environmental temperatures, desired temperatures and other
conditions. Usually, if the pool has a large water volume or if
environment temperatures are low and the desired temperature
is high, longer heating time is required. However, if the
temperature increase is less than 0.2°C after one heating hour,
the water temperature can be thought to have reached the
highest balance temperature.
001 002 003
Contact your local Bestway After Sales Service point to get
instructions.
Contact your local Bestway After Sales Service point to get
instructions.
Replace the filter pump or sand filter refer to the user’s
manual.
Contact your local Bestway After Sales Service point to get
instructions.
The pool heater was not designed to operate with water
temperatures lower than 4ºC (39°F). Unplug the heater and
only re-start the heater when the water temperature reaches
6°C (43°F).
The pool heater was not designed to operate with water
temperatures higher than 50ºC (122°F). Unplug the heater
and only re-start the heater when the water temperature
reaches 38°C (100°F).
Alarms
Phenomenon Reasons Solutions
The temperature sensor does not work
Filter pump or sand filter does not operate, no water flow.
Water flow sensor broken.
The water temperature is lower than 4°C (39°F) .
The water temperature is higher than 50°C (122°F) .
The fuse is disconnected
1. Push the reset button, then check if the heater can work
normally.
2. In case the alarm still remains, check the RESET BUTTON
section in manual.
3. Contact your local Bestway After Sales Service point to get
instructions.
The manual reset thermal cut-out has been tripped
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 58259 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 58259 in the language / languages: All languages as an attachment in your email.

The manual is 19,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bestway 58259

Bestway 58259 User Manual - English - 6 pages

Bestway 58259 User Manual - Dutch, French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info